Page 49 - Turning_catalog_INCH_2022_45_P261-508
P. 49
GIF ±.001
(full radius) 7° .197
Precision Double-Ended Full .602 Ref.
Radius Inserts for Grooving
CW
RE=CW/2 BW GROOVE-TURN
Dimensions Tough 1 Hard Recommended
Machining Data
IC8250 IC808 f groove
Designation CW RE CWTOL (1) RETOL (2) BW CDX (3) IC20 (IPR)
GIF 4.78-2.39 .188 .094 .0008 .0020 .157 .449 • • .0043-.0079
GIF 6.35-3.18 .250 .125 .0008 .0020 .189 .417 • .0055-.0106
• DMIN for internal machining = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381)
• CGHN-D (291) • CGHN-DG (292) • CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286)
• GHGR/L (287) • GHMPR/L (283) • GHMR/L (283)
±.001
GIA-K 15°
(W=.118-.236) 7°
Flat Top Precision Double Ended .602 Ref. .197
Inserts with T-Land for
Machining Cast Iron CW
RE BW
Dimensions Tough 1 Hard Recommended Machining Data
IC5010 IC428 ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW CDX (3) (inch) (IPR) (IPR)
GIA 3.00K-0.40 .118 .0157 .0008 .0012 .094 .512 • • .020-.071 .0047-.0079 .0027-.0051
GIA 4.00K-0.40 .157 .0157 .0008 .0012 .126 .512 • • .020-.094 .0063-.0106 .0035-.0071
GIA 4.00K-0.80 .157 .0315 .0008 .0020 .126 .512 • • .039-.094 .0071-.0126 .0035-.0075
GIA 5.00K-0.80 .197 .0315 .0008 .0020 .157 .512 • • .039-.118 .0091-.0157 .0043-.0094
GIA 6.00K-0.80 .236 .0315 .0008 .0020 .189 .512 • • .039-.142 .0106-.0189 .0055-.0114
• DMIN for internal machining = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381)
• CGHN-D (291) • CGHN-DG (292) • CGHN-S (291) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286)
• GHGR/L (287) • GHMPR/L (283) • GHMR/L (283)
309