Page 58 - Turning_catalog_INCH_2022_45_P261-508

GROOVE-TURN PHGR/L CWN (1) CWX (2) CUTDIA (3) CDX CWN-CWX HF .630 .630 OAL 1.299 .594 WB HBH .075 GDMW 2.4 SR M5X16 DIN912 HW 4.0
LH
Holders for External
H
Grooving and Turning
HBH
CUTDIA
OAL
WF
B
CDX
Left-hand shown
(4)
LH
H
Designation
B
HF
WF
WB
Insert
PHGR/L 16-2.4
.669
.630
1.340
.125
.094
.22
4.331
PHGR/L 19-2.4
.750
.750
.094
.670
1.300
PHGR/L 25.4-2.4
.125
.075
GDMW 2.4
SR M5X16 DIN912 HW 4.0
.960
1.000
6.000
1.300
• For user guide, see pages 471-488
(1) Minimum cutting width .094 .125 1.300 .670 1.000 1.000 .750 4.500 1.300 .710 - - .075 GDMW 2.4 SR M5X16 DIN912 HW 4.0
(2) Maximum cutting width
(3) Maximum parting diameter
(4) Cutting depth maximum
For inserts, see pages: GDMW 24 (318)

LH
PHAR/L HF H
External Machining Holders
for PADR/L Adapters HBH
OAL
CDX
B
Right-hand shown
Designation CDX (1) H HF B OAL LH HBH Adapter (2)
PHAR 19 .640 .750 .750 .750 6.000 1.400 .39 PADR/L 2.4 SR 76-1368 HW 4.0 SR M5-04451 T-20/5
PHAR/L 25.4 .640 1.000 1.000 1.000 6.000 1.400 .20 PADR/L 2.4 SR 76-1368 HW 4.0 SR M5-04451 T-20/5
(1) Cutting depth maximum
(2) Adapters to be ordered separately
For tools, see pages: PADR/L (318)

PADR/L OAH
Adapters for GDMW/GDMY HF
Groove-Turn Inserts WB OAL
CDX WF
CWN-CWX
Left-hand shown
Designation CWN (1) CWX (2) CDX (3) OAL WB HF OAH WF Insert
PADR/L 2.4 .094 .125 .642 1.614 .075 .945 1.181 .165 GDMW 2.4
• For user guide, see pages 471-488
(1) Minimum cutting width
(2) Maximum cutting width
(3) Cutting depth maximum
For inserts, see pages: GDMW 24 (318)
For holders, see pages: PHAR/L (318)

GDMW 2.4 ±.004 .787 Ref.
Utility Double-Ended
Inserts for External Turning, 7˚ .217
Grooving and Parting
CW RE BW
Dimensions Tough 1 Hard Recommended Machining Data
IC830 IC808 IC908 IC20 IC20N ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW CDX (3) (inch) (IPR) (IPR)
GDMW 2.4 .094 .007 .0016 .0012 .079 .709 • • • • • .010-.059 .0027-.0047 .0020-.0031
• For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Cutting depth maximum
For tools, see pages: PADR/L (318) • PHGR/L (318) • PHSR/L (398)
318 ISCAR