Page 114 - Turning_catalog_INCH_2022_45_P509-690

FACE GROOVING HFAER/L-4 CDX .157 DAXN (1) CDX DAXN-DAXX (2) OHX 2.697 OAL OHX (3) WF .457 SR M5X16 DIN912 HW 4.0

Adapters for External
Facing Along Shafts

Right-hand shown

WF
OAL
DAXX
CW
Designation

HFAER/L 40-4T20
.787
1.57
1.89
.827
HFAER/L 48-4T20
.457
.827
1.89
2.36
.157
2.697
.787
HW 4.0
SR M5X16 DIN912
HFAER/L 60-4T25
3.94
2.697
.984
2.95
.157
HW 4.0
1.024
HFAER/L 75-4T25
SR M5X16 DIN912
.457
• DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades • For user guide, see pages 607-612, 663-669
(1) Minimum penetration diameter
(2) Maximum penetration diameter .984 .157 2.36 2.95 2.697 1.024 .457 SR M5X16 DIN912 HW 4.0
(3) Maximum overhang
For inserts, see pages: DGN-MF (537) • GRIPA (278) • GRIPA (full radius) (279) • HFPR/L (629) • HFPR/L (full radius) (629)
• GRIP (277) • GRIP (full radius) (278) • DGN/DGNC/DGNM-C (533) • DGN/DGNM-J/JS/JT (535) • HGPL (631)
For holders, see pages: C#-HAD (682) • C#-HAPR/L (682) • HAPR/L (621) • HAR/L (621) • IM-HAD (690) • IM-HAPR/L (690)

HFAER/L-5T, 6T
Adapters for External
Facing Along Shafts DAXN-DAXX
CDX OAL WF
Right-hand shown
Designation CW CDX DAXN (1) DAXX (2) OAL WF
HFAER/L 70C-5T25 .197 .984 2.76 3.74 2.598 .480 EDG 33B*
HFAER/L 95C-5T25 .197 .984 3.74 5.12 2.598 .480 EDG 33B*
HFAER/L 70C-6T28 .236 1.102 2.76 3.94 2.717 .484 EDG 33B*
HFAER/L 100C-6T32 .236 1.260 3.94 7.09 2.874 .484 EDG 33B*
HFAER/L 180C-6T32 .236 1.260 7.09 15.75 2.874 .484 EDG 33B*
• After initial groove, no limitation to widening groove outward from or toward center
• Adapters can be mounted on standard HAR/L, HAPR/L, HAI holders for external machining
• DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades • For user guide, see pages 607-612, 663-669
(1) Minimum penetration diameter
(2) Maximum penetration diameter
* Optional, should be ordered separately
For inserts, see pages: HFPR/L (629) • HFPR/L (full radius) (629) • GRIP (277) • GRIP (full radius) (278) • DGN/DGNC/DGNM-C (533)
• DGN/DGNM-J/JS/JT (535) • DGN-W (534) • HGPL (631)
For holders, see pages: C#-HAD (682) • C#-HAPR/L (682) • HAPR/L (621) • HAR/L (621) • IM-HAD (690) • IM-HAPR/L (690)

622 ISCAR