Page 116 - Turning_catalog_INCH_2022_45_P509-690

FACE GROOVING HGAIR/L-3 CDX DAXN-DAXX OHX .59 (2) .118 OAL .402 WF OHX (3) SR 16-236 P T-15/3
CDX
Adapters for Internal Face
Grooving and Turning

CW
OAL
Right-hand shown

(1)
DAXN
WF
CW
DAXX
Designation
HGAIR/L 12-3M
19.69
2.165
.47
.827
.079
HGAIR/L 12-3T6
.118
SR 16-236 P
.236
.47
T-15/3
2.165
.827
.402
HGAIR/L 14-3T7
.55
.67
T-15/3
.827
.402
.118
.67
SR 16-236 P
.83
2.165
.315
HGAIR/L 17-3T8
T-15/3
.402
.354
.827
.98
.118
.83
SR 16-236 P
2.165
HGAIR/L 21-3T9
.354
.118
SR 16-236 P
HGAIR/L 25-3T9
.98
T-15/3
.402
2.165
.827
.406
HGAIR/L 35-3T10 .276 1.38 1.34 .118 2.165 .402 .827 SR 16-236 P T-15/3
1.77
.866
.118
SR 16-236 P
2.205
.394
T-15/3
HGAIR/L 45-3T10 .394 1.77 2.56 .118 2.205 .406 .866 SR 16-236 P T-15/3
HGAIR/L 65-3T18 .709 2.56 4.53 .118 2.520 .445 1.181 SR 16-236 P T-15/3
HGAIR/L 115-3T18 .709 4.53 15.75 .118 2.520 .445 1.181 SR 16-236 P T-15/3
• HGN & GRIP 3 inserts can be used only with right-hand adapters, HGPL 3 inserts with left-hand adapters • For user guide, see pages 607-612, 663-669
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Maximum overhang
For inserts, see pages: GRIP (277) • GRIP (full radius) (278) • HGN-C (541) • HGN-J (542) • HGN-UT (542) • HGPL (631)
For holders, see pages: C#-HAD (682) • C#-HAPR/L (682) • HAI-C (624) • HAPR/L (621) • HAR/L (621) • IM-HAD (690) • IM-HAPR/L (690)

HFAIR/L-4 CDX
Adapters for Internal Face
Grooving and Turning DAXN-DAXX
CW OHX
OAL WF
Right-hand shown
Designation CDX CW DAXN (1) DAXX (2) OAL WF OHX (3)
HFAIR/L 34-4T18 .709 .157 1.34 1.57 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
HFAIR/L 40-4T20 .787 .157 1.57 1.89 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
HFAIR/L 48-4T20 .787 .157 1.89 2.36 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
HFAIR/L 60-4T25 .984 .157 2.36 2.95 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
• DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades • For user guide, see pages 607-612, 663-669
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Maximum overhang
For inserts, see pages: DGN-MF (537) • GRIPA (278) • GRIPA (full radius) (279) • HFPR/L (629) • HFPR/L (full radius) (629)
• GRIP (277) • GRIP (full radius) (278) • DGN/DGNC/DGNM-C (533) • DGN/DGNM-J/JS/JT (535) • HGPL (631)
For holders, see pages: C#-HAD (682) • C#-HAPR/L (682) • HAI-C (624) • HAPR/L (621) • HAR/L (621) • IM-HAD (690) • IM-HAPR/L (690)

HAI-C CDX (a) OAL DCONMS Coolant Outlet
Boring Bars with Coolant
Holes for Internal Grooving HF
and Turning Adapters WF (holder)
WF (adapter)
WF (assembly)=WF (adapter)+WF (holder)
Designation DCONMS OAL HF WF (1) CSP (2)
HAI 19 .750 5.120 .338 .005 1 SR 14-519 T-20/3
HAI 25.4C 1.000 6.000 .460 .130 1 SR 14-519 T-20/3 PL 100
HAI 31.7C 1.250 7.874 .570 .255 1 SR 14-519 T-20/3 PL 125
HAI 38.1C 1.500 10.000 .670 .380 1 SR 14-519 T-20/3 PL 150
• The HAI boring bars can be used with right and left-hand adapters • (a) CDX - see corresponding adapters
(1) Holder
(2) 0 - Without coolant supply, 1 - With coolant supply
For tools, see pages: HFAIR/L-4 (624) • HFAIR/L-DG (625) • HGAIR/L-3 (624)

624 ISCAR