Page 115 - Turning_catalog_INCH_2022_45_P509-690
P. 115
LH
HFHR/L-M
Toolholders for Shallow DAXN-DAXX H H OAH
Face Grooving CWN-CWX CDX OAW
CDX
WF B
OAL Right-hand shown FACE GROOVING
Designation CWN (1) CWX (2) CDX WF H B OAL LH DAXN (3) DAXX (4) OAH OAW
HFHR 19M .118 .236 .209 .750 .750 .750 5.000 1.420 .79 78.74 1.10 .850 SR M6X16 DIN912 HW 5.0
HFHR/L 25.4M .118 .236 .209 1.000 1.000 1.000 6.000 1.420 .79 78.74 1.35 1.100 SR M6X16 DIN912 HW 5.0
• DGN & GRIP 4 - 6 inserts can be used only with right-hand tools, HGPL 4 - 6 inserts with left-hand tools
• After initial groove, no limitation to widening groove outward or toward center
• For user guide, see pages 607-612, 663-669
(1) Minimum cutting width
(2) Maximum cutting width
(3) Minimum penetration diameter
(4) Maximum penetration diameter
For inserts, see pages: HFPR/L (629) • HFPR/L (full radius) (629)
HFHR/L-M & HFHPR/L-M CWX=.236” Insert initial face grooving range
Integral Toolholders DAXN-DAXX
For shallow machining to max. .209” depth of groove. DAXN-DAXX CW DAXX DAXN CW
One toolholder can be mounted with inserts in .118-.236” widths. DAXN-DAXX 2.362 .945 .117
The initial major diameter groove is limited by the insert geometry 3.543 .906 .157
in each size. CWN=.118” 11.811 .827 .197
.236
.787
∞
After initial groove, face recessing outward or toward
center is not limited by insert geometry.
HFHPR/L-M H H OAH
Perpendicular Toolholders DAXN-DAXX
for Shallow Face Grooving .98
WF B
CDX
CWN-CWX CDX
OAL
Right-hand shown
Designation CWN (1) CWX (2) CDX WF H B OAL DAXN (3) DAXX (4) OAH
HFHPR/L 19M .118 .236 .197 .960 .750 .750 5.000 .95 78.74 1.10 SR M6X16 DIN912 HW 5.0
HFHPR/L 25.4M .118 .236 .197 1.220 1.000 1.000 6.000 .95 78.74 1.35 SR M6X16 DIN912 HW 5.0
• DGN & GRIP 4 - 6 inserts can be used only with right-hand tools, HGPL 4 - 6 inserts with left-hand tools
• After initial groove, no limitation to widening groove outward or toward center
• For user guide, see pages 607-612, 663-669
(1) Minimum cutting width
(2) Maximum cutting width
(3) Minimum penetration diameter
(4) Maximum penetration diameter
For inserts, see pages: HFPR/L (629) • HFPR/L (full radius) (629)
623