Page 118 - Turning_catalog_INCH_2022_45_P509-690
P. 118
FACE GROOVING C#-HFIR/L-MC CWN (1) CWX (2) DCONMS .445 WF CWN-CWX .21 BDRED LF BDRED DCONMS SR M5X16 DIN912 Right-hand shown
Boring Bars for Internal Grooving
and Turning with CAMFIX
Exchangeable Shanks
LDRED
(3)
Designation
CDI
WF
LDRED
LF
C4 HFIR/L-MC
2.05
1
3.15
.236
1.575
.984
.118
HW 4.0
EZ 83
C5 HFIR-MC
2.05
.984
.445
.236
.118
1.968
HW 4.0
SR M5X16 DIN912
EZ 83
1
3.15
• DGN & GRIP 4 - 6 inserts can be used only with right-hand tools, HGPL 4 - 6 inserts with left-hand tools
• After initial groove, no limitation to widening groove outward or toward center
• For user guide, see pages 607-612, 663-669
(1) Minimum cutting width
(2) Maximum cutting width
(3) 1 - Hole for data chip, 0 - Without hole for data chip
For inserts, see pages: DGN-MF (537) • GRIPA (278) • GRIPA (full radius) (279) • HFPR/L (629) • HFPR/L (full radius) (629)
• GRIP (277) • GRIP (full radius) (278) • DGN/DGNC/DGNM-C (533) • DGN/DGNM-J/JS/JT (535) • DGN-W (534) • HGPL (631)
DCONMS
IM-HFIR-MC BDRED LF
Tools for Internal Grooving and WF .21
Turning with ISO 26622-1(*)
Tapered Shank
CWN-CWX LDRED Right-hand shown
Designation DCONMS LF BDRED WF LDRED CWN (1) CWX (2)
IM40 HFIR-MC 1.575 3.15 .984 .445 2.05 .118 .236 SR M5X16 DIN912 HW 4.0 EZ 83
IM50 HFIR-MC 1.968 3.15 .984 .445 2.05 .118 .236 SR M5X16 DIN912 HW 4.0 EZ 83
• (*) Tools with orientation holes in the flange groove can be supplied on request
• DGN & GRIP 4 - 6 inserts can be used only with right-hand tools, HGPL 4 - 6 inserts with left-hand tools
• After initial groove, no limitation to widening groove outward or toward center • For user guide, see pages 607-612, 663-669
(1) Minimum cutting width
(2) Maximum cutting width
For inserts, see pages: DGN-MF (537) • GRIPA (278) • GRIPA (full radius) (279) • HFPR/L (629) • HFPR/L (full radius) (629)
• GRIP (277) • GRIP (full radius) (278) • DGN/DGNC/DGNM-C (533) • DGN/DGNM-J/JS/JT (535) • DGN-W (534)
626 ISCAR