Page 62 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN HFAIR/L-4 DAXN-DAXX CDX
Adapters for Internal Face CW OHX
Grooving and Turning

OAL WF

Right-hand shown

METRIC

Designation CDX CW DAXN(1) DAXX(2) OAL WF OHX(3)
18.00
HFAIR/L 34-4T18 20.00 4.00 34.0 40.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0
HFAIR/L 40-4T20 20.00
HFAIR/L 48-4T20 25.00 4.00 40.0 48.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0
HFAIR/L 60-4T25
4.00 48.0 60.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0

4.00 60.0 75.0 67.00 15.3 33.0 SR M5X16 DIN912 HW 4.0

INCH

Designation CDX CW DAXN(1) DAXX(2) OAL WF OHX(3)

HFAIR/L 34-4T18 .709 .157 1.34 1.57 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
HFAIR/L 40-4T20 .787 .157 1.57 1.89 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
.787 .157 1.89 2.36 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
HFAIR/L 48-4T20 .984 .157 2.36 2.95 2.638 .602 1.299 SR M5X16 DIN912 HW 4.0
HFAIR/L 60-4T25

• DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades • For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Maximum overhang
For inserts, see pages: DGN-MF (80) • GRIPA (73) • GRIPA (full radius) (74) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70)
• GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79) • DGN/DGNM-J/JS/JT (82) • HGPL (75)
For holders, see pages: C#-HAD (144) • C#-HAPR/L (144) • HAI-C (60) • HAPR/L (52) • HAR/L (51) • IM-HAD (152) • IM-HAPR/L (152)

HAI-C CDX(a) DCONMS Coolant Outlet
Boring Bars with Coolant
Holes for Internal Grooving OAL
and Turning Adapters
WF (holder) HF
WF (adapter)
WF (assembly)=WF (adapter)+WF (holder)

METRIC

Designation DCONMS OAL HF WF(1) CSP(2) SR 14-519 T-20/3 PL 25
20.00 130.00 9.0 0.50 0 SR 14-519 T-20/3 PL 32
HAI 20 25.00 150.00 11.5 3.00 1 SR 14-519 T-20/3 PL 40
HAI 25C 32.00 200.00 14.5 6.50 1 SR 14-519 T-20/3
HAI 32C 40.00 250.00 18.0 10.50 1 PL 100
HAI 40C SR 14-519 T-20/3 PL 125
IN CH SR 14-519 T-20/3 PL 150
SR 14-519 T-20/3
Designation DCONMS OAL HF WF(1) CSP(2) SR 14-519 T-20/3

HAI 19 .750 5.120 .338 .005 1
HAI 25.4C
HAI 31.7C 1.000 6.000 .460 .130 1
HAI 38.1C
1.250 7.874 .570 .255 1

1.500 10.000 .670 .380 1

• The HAI boring bars can be used with right and left-hand adapters • (a) CDX - see corresponding adapters
(1) Holder
(2) 0 - Without coolant supply, 1 - With coolant supply
For tools, see pages: HFAIR/L-4 (60) • HFAIR/L-DG (61) • HGAIR/L-3 (57)

60 ISCAR