Page 59 - ISCAR FACE GROOVING LINES
P. 59
HGAIR/L-3 DAXN-DAXX CDX FACE GROOVE-TURN
Adapters for Internal Face CW OHX
Grooving and Turning
OAL WF
Right-hand shown
METRIC
Designation CDX DAXN(1) DAXX(2) CW OAL WF OHX(3)
2.00 12.0 500.0 3.00 55.00
HGAIR/L 12-3M 6.00 12.0 15.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3
HGAIR/L 12-3T6 7.00 14.0 17.0 3.00 55.00
HGAIR/L 14-3T7 8.00 17.0 21.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3
HGAIR/L 17-3T8 9.00 21.0 25.0 3.00 55.00
HGAIR/L 21-3T9 9.00 25.0 34.0 3.00 55.00 10.2 21.0 SR 16-236 P T-15/3
HGAIR/L 25-3T9 10.00 35.0 45.0 3.00 56.00
HGAIR/L 35-3T10 10.00 45.0 65.0 3.00 56.00 10.2 21.0 SR 16-236 P T-15/3
HGAIR/L 45-3T10 18.00 65.0 115.0 3.00 64.00
HGAIR/L 65-3T18 18.00 115.0 400.0 3.00 64.00 10.2 21.0 SR 16-236 P T-15/3
HGAIR/L 115-3T18
H 10.2 21.0 SR 16-236 P T-15/3
10.3 22.0 SR 16-236 P T-15/3
10.3 22.0 SR 16-236 P T-15/3
11.3 30.0 SR 16-236 P T-15/3
11.3 30.0 SR 16-236 P T-15/3
INC
Designation CDX DAXN(1) DAXX(2) CW OAL WF OHX(3)
.118 2.165
HGAIR/L 12-3M .079 .47 19.69 .118 2.165 .402 .827 SR 16-236 P T-15/3
HGAIR/L 12-3T6 .118 2.165 T-15/3
HGAIR/L 14-3T7 .236 .47 .59 .118 2.165 .402 .827 SR 16-236 P T-15/3
HGAIR/L 17-3T8 .118 2.165 T-15/3
HGAIR/L 21-3T9 .276 .55 .67 .118 2.165 .402 .827 SR 16-236 P T-15/3
HGAIR/L 25-3T9 .118 2.205 T-15/3
HGAIR/L 35-3T10 .315 .67 .83 .118 2.205 .402 .827 SR 16-236 P T-15/3
HGAIR/L 45-3T10 .118 2.520 T-15/3
HGAIR/L 65-3T18 .354 .83 .98 .118 2.520 .402 .827 SR 16-236 P T-15/3
HGAIR/L 115-3T18 T-15/3
.354 .98 1.34 .402 .827 SR 16-236 P
.394 1.38 1.77 .406 .866 SR 16-236 P
.394 1.77 2.56 .406 .866 SR 16-236 P
.709 2.56 4.53 .445 1.181 SR 16-236 P
.709 4.53 15.75 .445 1.181 SR 16-236 P
• HGN & GRIP 3.. inserts can be used only with right-hand adapters, HGPL 3.. inserts with left-hand adapters • For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Maximum overhang
For inserts, see pages: GRIPA (73) • GRIPA (full radius) (74) • GRIP (70) • GRIP (full radius) (72) • HGN-C (76) • HGN-J (77) • HGN-UT (78) • HGPL (75)
For holders, see pages: C#-HAD (144) • C#-HAPR/L (144) • HAI-C (60) • HAPR/L (52) • HAR/L (51) • IH-HFAIR (58) • IM-HAD (152) • IM-HAPR/L (152)
57
