Page 57 - ISCAR FACE GROOVING LINES
P. 57
HFHPR/L-M H HF OAH FACE GROOVE-TURN
Perpendicular Toolholders B
for Shallow Face Grooving DAXN-DAXX 25
WF
CDX
CWN-CWX
CDX
OAL Right-hand shown
METRIC
Designation CWN(1) CWX(2) CDX WF H B OAL DAXN(3) DAXX(4) OAH HF
HFHPR/L 20M 2000.0 29.0 20.0 SR M6X16 DIN912 HW 5.0
HFHPR/L 25M 3.00 6.00 5.00 25.30 20.0 20.0 130.00 20.0 2000.0 34.0 25.0 SR M6X16 DIN912 HW 5.0
3.00 6.00 5.00 30.30 25.0 25.0 150.00 20.0
• DGN & GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools
• After initial groove, no limitation to widening groove outward or toward center
• For user guide, see pages 161-173
(1) Minimum cutting width
(2) Maximum cutting width
(3) Minimum penetration diameter
(4) Maximum penetration diameter
For inserts, see pages: HFPR/L (68) • HFPR/L (full radius) (69)
HFHPR/L-M DAXN-DAXX .98 H H OAH
Perpendicular Toolholders B
for Shallow Face Grooving
CDX WF
CWN-CWX CDX
OAL
Right-hand shown
INCH
OAH
Designation CWN(1) CWX(2) CDX WF H B OAL DAXN(3) DAXX(4) 1.10 SR M6X16 DIN912 HW 5.0
HFHPR/L 19M .118 .236 .197 .960 .750 .750 5.000 .95 78.74 1.35 SR M6X16 DIN912 HW 5.0
HFHPR/L 25.4M .118 .236 .197 1.220 1.000 1.000 6.000 .95 78.74
• DGN & GRIP 4.. - 6.. inserts can be used only with right-hand tools, HGPL 4.. - 6.. inserts with left-hand tools
• After initial groove, no limitation to widening groove outward or toward center
• For user guide, see pages 161-173
(1) Minimum cutting width
(2) Maximum cutting width
(3) Minimum penetration diameter
(4) Maximum penetration diameter
For inserts, see pages: HFPR/L (68) • HFPR/L (full radius) (69)
55
