Page 67 - ISCAR FACE GROOVING LINES

CR HFIR-M CDX 25 FACE GROOVE-TURN
Cartridges for Face HF
Grooving and Turning CW DAXN-DAXX DAXN-DAXX H
Min Max B
3 CWN-CWX WF
4,5,6 60 130
60 ∞

CWN-CWX OAL Right-hand shown

METRIC

Designation CWN(1) CWX(2) HF B H OAL WF CDX
CR HFIR-16M 20.00 5.00
CR HFIR-20M 3.00 6.00 16.0 16.0 20.0 67.00 24.00 5.00

3.00 6.00 20.0 20.0 24.0 72.00

• Used for shallow internal face machining to max. 5 mm depth of groove • Inserts in 3-6 mm widths can be mounted on the cartridges
• Only DGN & GRIP 4.. - 6.. inserts can be used with the right-hand tools
(1) Minimum cutting width
(2) Maximum cutting width
For inserts, see pages: DGN-MF (80) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79)
• DGN/DGNM-J/JS/JT (82) • DGN-W (81)

CR-HFIR/L-M E F 45º
Assembly Dimensions L1
F(2)
Designation E R 20 M8 Assembly
CR HFIR/L-16M 25 24 Screw
CR HFIR/L-20M 30 L1(1) Rmax.
8 6 Assembly Screw(3)
10 6 M8X30
M8X30

(1) L adjustment±1
(2) F adjustment +-00.3
(3) Assembly screws ISO 7380 are recommended

Spare Parts

Designation SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN916 HW 2.0
CR HFIR-16M SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN913 HW 2.0
CR HFIR-20M

65