Page 58 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN USER GUIDE

Boring Bars for Adapters Coolant System

HGAIR/L & HFAIR/L Adapters and HAI Holders Coolant Inlet
Adapter clamped on HAI round shank holders can
machine deep internal boring and grooving applications. (1)
The tool can bore down to the bottom, and is supplied
with internal coolant for better performance. Connector
Seal
HAI HGAIR/L
HFAIR/L

HFAIR/L & HAI Holders Seal
HGAIR/L
Connector
Exchangeable for adapters, see page 60 Seal
adapters, see pages
57,60 (1) Connector for coolant inlet BSP 1/8 thread. For PL-20, use M6 thread.
Connector not supplied with tools.
HFAIR/L HGAIR/L - C - T-

HELIFACE Min. initial Internal Insert Max.
Internal adapters groove coolant width depth
right or left diameter of
groove

HAI Holder System Assembly

HFAIL & HGAIL HFAIR & HGAIR
Left-hand Adapters Right-hand Adapters

The same HAI boring bar can be used with right- and

left-hand adapters in a wide range of face machining

applications. The two screws and the central guiding slot

on the adapter correspond to the key and holes on the

holder ensuring strong, safe, and accurate clamping.

56 ISCAR