Page 72 - ISCAR FACE GROOVING LINES
P. 72
FACE GROOVE-TURNGRIP INSL (Ref.)
IC830Utility Double-Ended±0.1
IC8250Inserts for External, Internal
IC08and Face MachiningRE BW
IC808CW
IC908
IC418 No depth penetration limit
IC5010
IC806 Recommended Machining Data
IC807
IC804
Dimensions METRIC
Tough 1 Hard
f face- f face-turn
ap f turn f groove groove
(mm/rev)
Designation CW CWTOL(1) RE RETOL(2) INSL BW (mm) (mm/rev) (mm/rev) (mm/rev) 0.10-0.20
3.00 0.050 0.20 0.050 15.80 2.30 • • • • • • • • 0.25-1.80 0.14-0.18 0.07-0.11 0.08-0.20 0.10-0.20
GRIP 3002Y 3.00 0.050 0.30 0.050 15.80 2.30 • • • • • • • • 0.40-1.80 0.15-0.19 0.07-0.11 0.08-0.20 0.10-0.20
GRIP 3003Y 3.18 0.050 0.40 0.050 15.80 2.30 • ••• • 0.17-0.22 0.07-0.12 0.08-0.20 0.15-0.30
GRIP 318-040Y 4.00 0.050 0.20 0.050 19.00 2.80 • • • • • •• 0.50-1.90 0.16-0.21 0.09-0.14 0.10-0.24 0.15-0.30
GRIP 4002Y 4.00 0.050 0.18-0.24 0.09-0.15 0.10-0.24 0.15-0.30
GRIP 4004Y 4.76 0.050 0.25-2.40 0.21-0.33 0.10-0.20 0.10-0.24 0.15-0.35
GRIP 476-080Y 5.00 0.050 0.40 0.050 19.00 2.80 • • • • • • • • • • 0.50-2.40 0.20-0.30 0.11-0.20 0.12-0.24 0.15-0.35
GRIP 5005Y 5.00 0.050 0.80 0.050 19.00 3.10 • • • • • • 1.00-2.80 0.23-0.35 0.11-0.21 0.12-0.24 0.15-0.40
GRIP 5008Y 6.00 0.050 0.50 0.050 19.00 3.30 • • • • • • • • • • 0.60-3.00 0.22-0.36 0.13-0.23 0.12-0.28 0.15-0.40
GRIP 6005Y 6.00 0.050 0.80 0.050 19.00 3.40 • • • • • • • • 1.00-3.00 0.24-0.42 0.13-0.25 0.12-0.28 0.15-0.40
GRIP 6008Y 6.35 0.050 0.50 0.050 19.00 4.20 • • • • • • • • 0.25-0.44 0.14-0.27 0.12-0.28
GRIP 635-080Y 0.80 0.050 19.00 4.20 • • • • • • • • 0.60-3.60
0.80 0.050 19.00 4.20 • • • • • 1.00-3.60
1.00-3.80
• For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • C#-HFIR/L-MC (145) • CR HFIR-M (65) • HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51)
• HFHR/L-4T (41) • HFHR/L-5T (43) • HFIR/L-MC (63) • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50) • HFPAD-JHP (48) • HGAER/L-3 (52)
• HGAIR/L-3 (57) • HGHR/L-3 (39) • IM-HFIR-MC (62)
70 ISCAR
