Page 79 - ISCAR FACE GROOVING LINES
P. 79
HGN-J ±0.1 IC328
Inserts for Parting and IC830
Grooving Soft Materials, RE INSL IC354
Parting Tubes, Small Diameters CW IC308
and Thin-Walled Parts
METRIC FACE GROOVE-TURN
Dimensions Tough 1 Hard Recommended
Machining Data
Designation CW RE CWTOL(1) RETOL(2) INSL •••• f groove
16.10 (mm/rev)
HGN 3002J 3.00 0.20 0.05 0.030 0.04-0.15
• No depth limit • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • HFPAD-3 (49) • HFPAD-JHP (48) • HGAIR/L-3 (57) • HGHR/L-3 (39)
HGN-J ±.004
Inserts for Parting and
Grooving Soft Materials, RE
Parting Tubes, Small Diameters INSL
and Thin-Walled Parts
CW
Tough 1 Hard Recommended
INCH Machining Data
Dimensions
Designation CW RE CWTOL(1) RETOL(2) INSL IC328 f groove
.634 IC830 (IPR)
IC354
IC308 .0016-.0059
HGN 3002J .118 .0079 .0020 .0012 ••••
• No depth limit • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: • HFPAD-3 (49) • HFPAD-JHP (48) • HGAIR/L-3 (57) • HGHR/L-3 (39)
77
