Page 77 - ISCAR FACE GROOVING LINES
P. 77
HGPL ±0.1 IC328 INSL CW
Utility Double-Ended Inserts 7° IC354 BW
for Face Machining IC08
RE IC808
CW IC908
IC806
METRIC
FACE GROOVE-TURN
Dimensions Tough 1 Hard Recommended
Machining Data
Designation CW BW RE CWTOL(1) RETOL(2) INSL •• ap f face- f face-
groove turn
HGPL 3015Y 3.00 2.10 1.50 0.03 0.050 16.00 •••• (mm)
HGPL 3002Y 0.00-1.50 (mm/ (mm/
HGPL 3003Y 3.00 2.30 0.20 0.03 0.050 16.00 0.24-1.80 rev) rev)
HGPL 4002Y 3.00 2.30 0.30 0.03 0.050 16.00 • • • • • 0.36-1.80 0.08-0.20 0.12-0.23
HGPL 4004Y 4.00 2.80 0.20 0.03 0.050 19.00 •••• 0.24-2.40 0.08-0.20 0.12-0.23
HGPL 4020Y •••• 0.48-2.40 0.08-0.20 0.12-0.23
HGPL 5005Y 4.00 2.80 0.40 0.03 0.050 19.00 ••• 0.00-2.00 0.10-0.24 0.16-0.30
HGPL 5025Y 0.60-3.00 0.10-0.24 0.16-0.30
HGPL 6005Y 4.00 2.80 2.00 0.03 0.050 19.00 • •• 0.00-2.50 0.10-0.24 0.16-0.30
HGPL 6030Y 0.60-3.60 0.12-0.24 0.20-0.38
5.00 3.30 0.50 0.03 0.050 19.00 ••• 0.00-3.00 0.12-0.24 0.20-0.38
0.12-0.28 0.24-0.45
5.00 3.30 2.50 0.03 0.050 19.00 • ••• 0.12-0.28 0.24-0.45
6.00 4.20 0.50 0.03 0.050 19.00 •••
6.00 4.20 3.00 0.03 0.050 19.00
• No depth penetration limit • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-HFIR/L-MC (145) • HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51)
• HFHR/L-4T (41) • HFHR/L-5T (43) • HFHR/L-6T (45) • HFIR/L-MC (63) • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)
• HFPAD-JHP (48) • HGAER/L-3 (52) • HGAIR/L-3 (57) • HGHR/L-3 (39)
HGPL ±.004 INSL CW
Utility Double-Ended Inserts 7° BW
for Face Machining
RE
CW
Dimensions INCH Recommended Machining Data
Tough 1 Hard
IC328 ap f face-groove f face-turn
IC354
Designation CW BW RE CWTOL(1) RETOL(2) INSL IC08 (inch) (IPR) (IPR)
IC808 .0031-.0079 .0047-.0091
HGPL 3015Y IC908 .0031-.0079 .0047-.0091
HGPL 3002Y IC806 .0031-.0079 .0047-.0091
HGPL 3003Y .0039-.0094 .0063-.0118
HGPL 4002Y .118 .083 .059 .0012 .0020 .630 •• .000-.059 .0039-.0094 .0063-.0118
HGPL 4004Y •••• .0039-.0094 .0063-.0118
HGPL 4020Y .118 .091 .008 .0012 .0020 .630 .009-.071 .0047-.0094 .0079-.0150
HGPL 5005Y .118 .091 .012 .0012 .0020 .630 • • • • • .0047-.0094 .0079-.0150
HGPL 5025Y •••• .014-.071 .0047-.0110 .0094-.0177
HGPL 6005Y .0047-.0110 .0094-.0177
HGPL 6030Y .157 .110 .008 .0012 .0020 .748 •••• .009-.094
.157 .110 .016 .0012 .0020 .748 ••• .019-.094
.157 .110 .079 .0012 .0020 .748 .000-.079
.197 .130 .020 .0012 .0020 .748 • • • .024-.118
.197 .130 .098 .0012 .0020 .748 ••• .000-.098
.236 .165 .020 .0012 .0020 .748 • • • • .024-.142
.236 .165 .118 .0012 .0020 .748 ••• .000-.118
• No depth penetration limit • For cutting speed recommendations and user guide, see pages 161-173
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-HFIR/L-MC (145) • HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51)
• HFHR/L-4T (41) • HFHR/L-5T (43) • HFHR/L-6T (45) • HFIR/L-MC (63) • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50)
• HFPAD-JHP (48) • HGAER/L-3 (52) • HGAIR/L-3 (57) • HGHR/L-3 (39)
75
