Page 74 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURNGRIP (full radius) INSL (Ref.)
IC830Utility Double-Ended Full±0.1
IC8250Radius Inserts for External,
IC08Internal and Face Machining7°
IC808 CW
IC908Dimensions No depth penetration limit
IC418RE BW
IC5010 Recommended Machining Data
IC806METRIC
IC807Tough 1 Hard
IC804
f face- f face-turn
ap f turn f groove groove
(mm/rev)
Designation CW RE CWTOL(1) RETOL(2) INSL BW (mm) (mm/rev) (mm/rev) (mm/rev) 0.10-0.20
0.050 15.80 2.10 • • • • • • • • • • 0.00-1.50 0.18-0.26 0.07-0.13 0.08-0.20 0.10-0.20
GRIP 3015Y 3.00 1.50 0.05 •• • 0.19-0.28 0.07-0.13 0.08-0.20 0.15-0.30
GRIP 318-159Y 0.20-0.34 0.09-0.17 0.10-0.24 0.15-0.30
GRIP 4020Y 3.18 1.59 0.05 0.050 15.80 2.30 0.00-1.50 0.21-0.40 0.10-0.20 0.10-0.24 0.15-0.35
GRIP 476-238Y 0.050 19.00 2.80 • • • • • • • • • • 0.00-2.00 0.23-0.42 0.11-0.21 0.12-0.24 0.15-0.40
GRIP 5025Y 4.00 2.00 0.05 ••• • 0.24-0.50 0.13-0.25 0.12-0.28 0.15-0.40
GRIP 6030Y 0.25-0.53 0.14-0.27 0.12-0.28
GRIP 635-318Y 4.76 2.38 0.05 0.050 19.00 3.20 0.00-2.30
0.050 19.00 3.40 • • • • • • • • 0.00-2.50
5.00 2.50 0.05 0.050 19.00 4.20 • • • • • • • • •

6.00 3.00 0.05 •• • 0.00-3.00

6.35 3.18 0.05 0.050 19.00 4.00 0.00-3.10

• For cutting speed recommendations and user guide, see pages 161-173

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

For tools, see pages: • C#-HFIR/L-MC (145) • CR HFIR-M (65) • HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HFFR/L-T (51)

• HFHR/L-4T (41) • HFHR/L-5T (43) • HFHR/L-6T (45) • HFIR/L-MC (63) • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50) • HFPAD-6 (50) • HFPAD-JHP (48)

• HGAER/L-3 (52) • HGAIR/L-3 (57) • HGHR/L-3 (39) • IM-HFIR-MC (62)

GRIP (full radius) ±.004 INSL (Ref.)
Utility Double-Ended Full 7°
Radius Inserts for External,
Internal and Face Machining CW
RE BW
Dimensions
INCH No depth penetration limit
Tough 1 Hard
Recommended Machining Data

IC830 ap f turn f groove f face- f face-turn
IC8250 groove
Designation CW RE CWTOL(1) RETOL(2) INSL BW IC08 (inch) (IPR) (IPR) (IPR)
IC808 .000-.059 .0071-.0102 .0027-.0051 (IPR) .0039-.0079
GRIP 3015Y IC908 .000-.059 .0075-.0110 .0027-.0051 .0031-.0079 .0039-.0079
GRIP 318-159Y IC418 .000-.079 .0079-.0134 .0035-.0067 .0031-.0079 .0059-.0118
GRIP 4020Y IC5010 .000-.091 .0083-.0157 .0039-.0079 .0039-.0094 .0059-.0118
GRIP 476-238Y IC806 .000-.098 .0091-.0165 .0043-.0083 .0039-.0094 .0059-.0138
GRIP 5025Y IC807 .000-.118 .0094-.0197 .0051-.0098 .0047-.0094 .0059-.0157
GRIP 6030Y IC804 .000-.122 .0098-.0209 .0055-.0106 .0047-.0110 .0059-.0157
GRIP 635-318Y .0047-.0110
.118 .059 .0020 .0020 .622 .083 • • • • • • • • • •
•• •
.125 .063 .0020 .0020 .622 .091
.0020 .748 .110 • • • • • • • • • •
.157 .079 .0020 ••• •

.187 .094 .0020 .0020 .748 .126
.0020 .748 .134 • • • • • • • •
.197 .098 .0020 .0020 .748 .165 • • • • • • • • •

.236 .118 .0020 •• •

.250 .125 .0020 .0020 .748 .157

• For cutting speed recommendations and user guide, see pages 161-173

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

For tools, see pages: • C#-HFIR/L-MC (145) • CR HFIR-M (65) • HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61)

• HFFR/L-T (51) • HFHR/L-4T (41) • HFHR/L-5T (43) • HFHR/L-6T (45) • HFIR/L-MC (63) • HFPAD-3 (49) • HFPAD-4 (49) • HFPAD-5 (50)

• HFPAD-6 (50) • HFPAD-JHP (48) • HGAER/L-3 (52) • HGAIR/L-3 (57) • HGHR/L-3 (39) • IM-HFIR-MC (62)

72 ISCAR