Page 134 - MILLING CATALOG p319-550
P. 134
MILLING INSERTS APKW 100304 PDR (PCD) APMX RE BS Rd°
Single R.H. PCD Tipped 4.4 lNSL
Insert for Milling Aluminum Tough 1 Hard
W1 S
Dimensions
Designation W1 INSL APMX S RE BS ID8
ID5
APKW 100304 PDR (1) 6.76 11.47 2.00 3.50 0.40 1.52 • •
• Use ID5 for aluminum alloys with <12% silicon. • The inserts are supplied with spare screws.
(1) Important: use only on tools with diameters of 20 mm and larger
For tools, see pages: HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90 F90AP-10 (200)
• HM90 F90AP-10-JHP (200)
PCD
Recommended Machining Conditions
Grade D.O.C. (ap) mm Material Vc m/min Feed mm/tooth Cutting Edge
N ID5 <2.0 Aluminum alloys <12% silicon 300-3000
<2.0 Chipboard, fiberboard and plastics 2000-3000
<2.0 500-1500
<2.0 Copper alloys and brass 250-1000 0.05-0.25 Sharp
<2.0 Aluminum>12% silicon 300-3000
N ID8 Aluminum<12% silicon 2000-3000
<2.0 Chipboard, fiberboard and plastics
200-600
MMC
W1
APCT 1003PDR-HM APMX INSL Rd°
Inserts with 2 Helical Precision
Ground Cutting Edges for Recommended
High Accuracy Finishing Machining Data
BS RE S
Dimensions Tough 1 Hard
IC28 ap fz
IC328
Designation W1 RE INSL S APMX BS IC250 (mm) (mm/t)
6.70 0.25 10.95
APCT 100302R-HM 6.70 0.45 10.95 3.51 8.00 1.20 • 0.70-8.00 0.06-0.12
APCT 100304R-HM 6.70 0.50 10.95 •
APCT 1003PDR-HM 3.51 8.00 1.20 0.90-8.00 0.07-0.12
3.51 8.00 1.20 • • 0.90-8.00 0.07-0.15
• For cutting speed recommendations, see pages 542-547
For tools, see pages: APK-FE (239) • HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90 F90AP-10 (200)
• HM90 F90AP-10-JHP (200)
APCR 1003PDFR-P W1 Rd°
Super Positive Insert
with a Polished Rake for LE/APMX INSL Recommended
Machining Aluminum Machining Data
BS RE S
Dimensions Tough 1 Hard
IC28 ap fz
IC928
Designation W1 INSL S RE BS APMX (mm) (mm/t)
• •
APCR 1003PDFR-P 6.70 11.20 3.76 0.50 1.20 8.00 0.90-8.00 0.07-0.25
• Super positive rake sharp ground helical cutting edge, for finishing on aluminum, stainless steel and high temperature alloys
• For cutting speed recommendations, see pages 542-547
For tools, see pages: APK-FE (239) • HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90 F90AP-10 (200)
• HM90 F90AP-10-JHP (200)
450 ISCAR