Page 148 - MILLING CATALOG p319-550

MILLING INSERTS HP ADCR 1906 APMX INSL Rd°
Milling Inserts with 19 mm Cutting
Edge for Machining Aluminum Recommended Machining Data

BS RE S

Dimensions

IC328 ap fz
IC928
Designation RE INSL APMX S BS (mm) (mm/t) IC950
HP ADCR 190604PDFR-P 0.40
22.50 19.50 7.40 3.50 • 0.80-19.50 0.15-0.25IC28
IC908
• Super positive rake angle, polished sharp cutting edge • For aluminum and high temperature alloys • For cutting speed recommendations, see pages 542-547IC910

For tools, see pages: HP E90AT-19 (35) • HP F90AT-19 (215)

Rd°

HP ADKT/ADCT 1906 lNSL
Milling Inserts with 19 mm APMX
Cutting Edge for General Use

BS RE S

Dimensions Tough 1 Hard Recommended
Machining Data

ap fz

Designation INSL APMX RE S BS (mm) (mm/t)
1.00 6.83 2.70 • • •
HP ADCT 1906PDR 22.30 18.10 0.80 6.85 2.60 • • 1.40-18.10 0.08-0.15
HP ADKT 190608PDTR 22.30 18.10 1.00 6.85 • • 1.20-18.10 0.08-0.15
HP ADKT 190610PDTR 22.30 18.10 1.20 6.87 2.50 •• • 1.40-18.10 0.08-0.15
HP ADKT 190612PDTR 22.30 18.10 1.60 6.87 2.20 • • • 1.60-18.10 0.08-0.15
HP ADKT 190616PDTR 22.30 18.10 2.40 6.87 1.80 • • • 2.00-18.10 0.08-0.15
HP ADKT 190624PDTR 22.20 18.10 3.10 6.90 1.00 • • • • 2.80-18.10 0.08-0.15
HP ADKT 190631PDTR 22.10 18.10 4.00 6.89 0.60 • 3.50-18.10 0.08-0.18
HP ADKT 190640PDTR 20.40 17.30 0.50 • • • 4.40-17.30 0.08-0.18

• For cutting speed recommendations, see pages 542-547
For tools, see pages: HP E90AT-19 (35) • HP F90AT-19 (215)

ADKT ADCT

For general For general finishing
applications and high temp. alloys

HP ADKT/ADCT 2207 INSL Rd°
Inserts with Two 22 mm Long APMX
Cutting Edges for General Recommended
High Shoulder Milling Machining Data

BS RE S

Dimensions Tough 1 Hard

IC328 ap fz
IC928
Designation INSL APMX S RE BS IC950 (mm) (mm/t)
HP ADCT 2207PDR IC908
HP ADKT 2207PDTR IC910

25.73 22.60 7.50 1.00 3.43 • • • 1.40-22.60 0.07-0.15
• • • • • 1.20-22.60
25.73 22.60 7.50 0.80 3.43 0.10-0.20

• For cutting speed recommendations, see pages 542-547

For tools, see pages: HP F90AT-22 (216)

ADKT ADCT

For general For general finishing
applications and high temp. alloys

464 ISCAR