Page 179 - MILLING CATALOG p319-550
P. 179
IC28 Rd°
IC330
QPMR 1004-HQ-M IC328L/IC
Super Positive Square IC830
Milling Inserts for Machining IC928RE S
Aluminum, Stainless Steel and
High Temperature Alloys MILLING INSERTSTough 1 Hard
Dimensions Recommended Machining Data
Designation LS RE ap fz
(mm) (mm/t)
QPMR 100404PDN-HQ-M 10.35 4.48 0.40 • • • • • 0.80-9.60 0.08-0.15
• For cutting speed recommendations, see pages 542-547
For tools, see pages: E90SP (21) • FF90SP-10 (198) • SPK (239)
QPMT 100408PDTN L/IC Rd°
Neutral Insert with Reinforced RE S
Land for Slotting Recommended Machining Data
Tough 1 Hard
Dimensions
L S IC330 ap fz
10.35 4.12 IC328 (mm) (mm/t)
IC830 1.10-9.60 0.08-0.15
IC928
IC5400
IC950
IC810
IC910
Designation RE
QPMT 100408PDTN-M
0.70 • • • • • • • •
• For cutting speed recommendations, see pages 542-547
For tools, see pages: E90SP (21) • FF90SP-10 (198) • FDN (342) • FST (361) • SDN (353) • SPK (239) • SSB (362)
SPMT-HQ Rd°
Square Positive Inserts for
Right-Hand Tools for General Use L/IC
Dimensions RE S Recommended
Machining Data
Tough 1 Hard
Designation L S RE IC330 ap fz
IC328
IC830 (mm) (mm/t)
IC928 0.80-9.60 0.08-0.15
IC5400 1.00-9.60 0.08-0.15
IC950 1.20-9.60 0.10-0.20
IC808 2.00-9.60 0.10-0.20
IC810
IC910
DT7150
IC5100
SPMT 100404R-HQ-M 10.20 4.23 0.40 • • • • ••
0.60 • • • • • ••
SPMT 100408R-HQ-M 10.20 4.23 0.80 • • •••• ••
SPMT 100408TR-HQ-M 10.20 4.23 ••
SPMT 100416R-HQ-M 10.20 4.23 1.60
• For cutting speed recommendations, see pages 542-547
For tools, see pages: E90SP (21) • F90SP-10 (198) • SPK (239) • SSB (362)
...TR-HQ-M ...R-HQ-M
495