Page 180 - MILLING CATALOG p319-550
P. 180
MILLING INSERTS SPCT/SPMR PDR L/IC
Precision Ground Insert RE S
Used for Semi-Finish and
Finishing Applications RE
Dimensions 0.80 • Recommended
0.80 • Machining Data
Designation L S IC808 ap fz
(mm) (mm/t)
SPCT 100408PDR 10.20 4.13 1.20-9.60 0.08-0.12
SPMR 100408PDR 10.20 4.13 1.20-9.60 0.05-0.10
• For cutting speed recommendations, see pages 542-547
For tools, see pages: E90SP (21) • F90SP-10 (198) • SPK (239) • SSB (362)
XPMT-HQ HQ
Insert with 2 Right- or
Left-Hand Cutting Edges with L/IC Rd°
Positive or Reinforced Land
RE S Recommended Machining Data
Tough 1 Hard
Dimensions HQ
IC28 ap fz
IC328
Designation L S RE IC928 (mm) (mm/t)
IC950 0.07-0.12
IC910 0.08-0.15
XPMT 100408-HQ 10.20 4.12 0.60 • • • •• 1.00-9.60
XPMT 100408T-HQ 10.20 4.12 0.60 1.00-9.60
• For cutting speed recommendations, see pages 542-547
For tools, see pages: E90AC (36) • E90SP (21) • ETS (341) • F90SP-10 (198) • FDN (342) • FST (361) • SDN (353) • SPK (239) • SSB (362)
XPMT 100408-HQ XPMT 100408T-HQ
SDMT-PDR-HQ L/IC Recommended
General Use Inserts with BS RE S Machining Data
Four Helical Cutting Edges
for 90° Shoulder Milling Tough 1 Hard
Dimensions
Designation L S RE BS IC28 ap fz
IC330
IC328 (mm) (mm/t)
IC845 1.00-11.80 0.08-0.15
IC830 1.20-11.80 0.08-0.15
IC928 1.20-11.80 0.07-0.20
IC5400
IC5500
IC950
IC808
IC908
IC810
IC910
SDMT 1205PDR-HQ-HS 12.60 5.40 0.60 0.80 •
••••••••••••
SDMT 1205PDR-HQ-M 12.70 5.00 0.80 1.60
SDMT 1205PDR-HQ-MM 12.75 5.00 0.80 0.80 • • • •• •
• For cutting speed recommendations, see pages 542-547
For tools, see pages: F90SD-12 (204)
496 ISCAR