Page 175 - MILLING CATALOG p319-550

LNHW 1506 ANTN S W1IS8
(ceramic) L
Tangentially Clamped Ceramic Dimensions MILLING INSERTS
Inserts for High Speed APMX
Machining of Cast Iron RE

Recommended Machining Data

ap fz
(mm/t)
Designation W1 L S RE APMX (mm) 0.15-0.25
3.00 • 1.00-3.00
LNHW 1506 ANTN 6.00 15.30 12.90 0.80

• Provides high surface finish • Feature 4 R.H. and 4 L.H. cutting edges when used on F45LN.. cutters • Important: Tightening torque 3.5-4 Nxm

• For cutting speed recommendations, see pages 542-547

LNAT 1506AN-W W1 S
Tangentially Clamped Wiper L
Inserts for 45° Lead Angle
on F45LN Cutters 7.2

Dimensions Tough 1 Hard Recommended Machining Data

IC908 ap fz
IC910
Designation L S W1 (mm) (mm/t)
••
LNAT 1506AN-W 19.33 12.90 5.98 0.50-2.00 0.10-0.15

• The insert has one right- and one left-hand wiper • When feed per revolution is less than 7 mm, it is recommended to use only one wiper insert. When it is greater than 7

mm, use two wiper inserts. • For cutting speed recommendations, see pages 542-547

FIN LNAT 1607PN-R W1
Tangentially Clamped
Peripherally Ground Inserts with L 12.55 RE
2 Positive Rake Cutting Edges S
for Finishing Applications Tough 1 Hard

Dimensions Recommended
Machining Data

IC830 fz
IC808
Designation W1 L S RE (mm/t)
16.10 9.50 ••
FIN LNAT 1607 PN-R 7.00 0.30 0.08-0.15

• For cutting speed recommendations, see pages 542-547
For tools, see pages: FIN LNK-BT (240) • FIN LNK-INT (239)

491