Page 197 - MILLING CATALOG p319-550

SPKN ED.. IC328 L
Flat Rake Milling Inserts IC50M
for General Use IC250
IC950
Dimensions APMXIC910 Recommended
S BS IC520M Machining Data
IC20
Tough 1 Hard
MILLING INSERTS
Designation LS BS APMX • ap fz
1.40 9.50 • ••
SPKN 1203EDFR 12.70 3.18 1.40 9.50 •• (mm) (mm/t)
SPKN 1203EDTR 12.70 3.18 1.40 11.50 • 3.00-8.00 0.08-0.15
SPKN 1504EDTR 15.88 4.76 1.70 9.50 3.00-8.00 0.08-0.15
SPKN 1203EDTL 12.70 3.18 1.40 9.50 • 3.00-8.00 0.08-0.15
SPKN 1203EDR-42 12.70 3.18 1.40 9.50 •••• 3.00-8.00 0.08-0.15
SPKN 1203EDTR-42 12.70 3.18 1.40 11.50 •• 3.00-8.00 0.08-0.15
SPKN 1504EDTR-42 15.88 4.76 3.00-8.00 0.08-0.15
3.00-8.00 0.08-0.15

• For cutting speed recommendations, see pages 542-547
For tools, see pages: F75-M (216)

SPKR EDTR-HS IC=L
Square Positive Inserts with Chip
Splitting Serrated Cutting Edges APMX
BS
0.5

S

Dimensions Tough 1 Hard Recommended Machining Data

•••
••
Designation L S BS APMX IC328 ap fz
3.18 1.60 9.50 IC928 (mm) (mm/t)
4.80 2.00 12.24 IC520M 3.00-9.00 0.10-0.20
3.00-9.00 0.10-0.20
SPKR 1203EDTR-HS 12.70
SPKR 1504EDTR-HS 15.82

• For cutting speed recommendations, see pages 542-547

For tools, see pages: F75-M (216)

SPKR ED..-76 L
Square Milling Inserts with Ribs
Along Edges for 45° Roughing APMX
S BS

Dimensions Tough 1 Hard Recommended Machining Data

IC328 ap fz
IC950
Designation LS BS APMX (mm) (mm/t)
1.80 9.50 •
SPKR 1203EDL-76 12.70 3.18 •• 3.00-9.00 0.08-0.15
SPKR 1203EDR-76 12.70 3.18
15.88 4.76 1.80 9.50 •• 3.00-9.00 0.08-0.15
SPKR 1504EDTR-76
1.73 12.65 3.00-9.00 0.08-0.15

• For cutting speed recommendations, see pages 542-547
For tools, see pages: F75-M (216)

SDMT-AD-N L/IC
Inserts for General Use
on 45° Endmills

S 45° APMX
BS

Dimensions Tough 1 Hard Recommended Machining Data

IC50M ap fz
IC520M (mm/t)
LS APMX IC20 0.12-0.15
Designation 5.60 BS (mm)
•••
SDMT 0903AD-N 9.52 3.18 0.90 2.00-4.00

• For cutting speed recommendations, see pages 542-547 513
For tools, see pages: E45 / T245 (38)