Page 196 - MILLING CATALOG p319-550

MILLING INSERTS SEKR-AF-N-42 L
Super Positive Square Milling
Inserts for 45° Finishing 45° APMX
and Medium Machining BS
on Soft Materials

S Recommended Machining Data

Dimensions

IC328 ap fz

Designation L S BS APMX (mm) (mm/t)
3.18 6.50 • 2.00-6.00
SEKR 1203AF-N-42 12.70 1.80 0.10-0.15

• For cutting speed recommendations, see pages 542-547

For tools, see pages: F45E (225)

SEKR-AF..-76 L
Square Milling Inserts with
Ribs Along Edges for 45° 45° APMX
Roughing Applications BS

S Tough 1 Hard Recommended Machining Data

Dimensions

IC328 ap fz
IC928
Designation LS BS APMX IC950 (mm) (mm/t)

SEKR 1203AFN-76 12.70 3.18 1.80 6.50 ••• 2.00-6.00 0.12-0.20
SEKR 1204AFN-76 12.70 4.76 1.80 6.22 •
15.88 4.76 1.80 8.43 • 2.00-6.00 0.08-0.15
SEKR 1504AFTN-76
2.00-6.00 0.12-0.17

• For cutting speed recommendations, see pages 542-547
For tools, see pages: F45E (225)

SEKR-AFTR-HS L
Square Milling Inserts with Chip 45° APMX
Splitting Serrated Cutting Edge
for 45° Roughing Applications

S BS

Dimensions Tough 1 Hard Recommended Machining Data

Designation LS BS APMX IC328 ap fz
1.80 6.50 IC250
1.80 6.27 IC520M (mm) (mm/t)
1.80 8.30 2.00-6.00 0.15-0.25
SEKR 1203AFTR-HS 12.70 3.18 ••• 2.00-6.00 0.15-0.25
SEKR 1204AFTR-HS 12.63 4.76 • 2.00-6.00 0.15-0.25
15.88 4.76 •
SEKR 1504AFTR-HS

• For cutting speed recommendations, see pages 542-547
For tools, see pages: F45E (225)

SECT/SEMT 1404 S 45°
Positive Square Inserts for L/IC
General Soft and Clean Cutting APMX
BS RE

Dimensions Tough 1 Hard Recommended
Machining Data

Designation L S BS APMX RE IC330 ap fz
IC840
IC830 (mm) (mm/t)
IC5400 2.00-5.50 0.12-0.20
IC808 2.00-5.50 0.12-0.20
IC810

SECT 140420AR 14.04 4.50 3.70 5.50 2.00 ••
0.50 • ••••
SEMT 140405ATR 14.20 4.95 2.75 5.50

• SECT - Precision ground insert • SEMT - Utility insert • For cutting speed recommendations, see pages 542-547

For tools, see pages: HOE-R06 (218) • HOF-R06 (218)

512 ISCAR