Page 198 - MILLING CATALOG p319-550

MILLING INSERTS SCMT-19 90° D1 45º 75º
Square Inserts with a 7° Positive IC=L 7° 45º 45°
Flank for Semi-Roughing at RE
Medium to High Feeds S

Dimensions Tough 1 Hard Recommended Machining Data

IC830 ap fz
IC20
LS RE IC5005
0.80 IC807
1.20 IC907
Designation D1 (mm) (mm/rev)
•••••
SCMT 120408-19 12.70 4.76 5.50 3.00-8.00 0.08-0.15
SCMT 120412-19 12.70 4.76 5.50 • 0.08-0.15
3.00-8.00

• For cutting speed recommendations, see pages 542-547

For tools, see pages: E45 / T245 (38)

XNMU 0904PN APMX
Square Inserts with 4 Right- and
4 Left-Hand Cutting Edges

RE LS

Dimensions Tough 1 Hard Recommended
Machining Data

IC830 fz
IC5400
IC808
Designation APMX L S RE (mm/t)
5.95 •••
XNMU 090408-PNTN 8.20 9.10 0.80 0.05-0.15

• For cutting speed recommendations, see pages 542-547
For tools, see pages: ETS-XN09 (340) • FDN-XN09 (349) • SDN-XN09 (357)

XNMU 13
Square Inserts with 4 Right- and
4 Left-Hand Cutting Edges

RE L S

Dimensions Tough 1 Hard Recommended
Machining Data

Designation L S RE IC330 fz
13.00 8.50 IC845
XNMU 130608PNN-MM 13.00 8.80 IC830 (mm/t)
XNHU 130608PNN-PL 13.00 8.80 IC5400 0.08-0.20
XNMU 130608PNN-PL 13.00 8.80 IC380 0.08-0.20
XNMU 130608PNTN IC808 0.08-0.20
IC810 0.08-0.20
IC5100

0.80 • ••••
0.80 •
0.80 •
0.80 • •

• For cutting speed recommendations, see pages 542-547

For tools, see pages: ETS-XN13 (340) • FDN-XN13 (350) • SDN-XN13 (357) • SM-XN13 (246) • XNK-XN13 (239)

514 ISCAR