Page 103 - TURNING CATALOG p121-254

VCGT-DW (PCD) RE L S ID5 117.5° 48° 35°
Inserts with 7° Clearance LE 95º MAX MAX
and a Single PCD Top D1 ISOTURN INSERTS
Corner Tip Chipformer for 35° 7° 107.5º
Machining Aluminum IC 31°
MAX
Dimensions
95º 112°

52° 50° 70°MAX
MAX MAX

91° 93° 72.5º

Recommended Machining Data

ap f

Designation L IC S RE LE D1 (mm) (mm/rev)
4.40 • 0.10-3.00 0.05-0.30
VCGT 160404-DW 16.60 9.52 4.76 0.40 6.60 4.40 • 0.10-3.00 0.05-0.30
0.05-0.30
VCGT 160408-DW 16.60 9.52 4.76 0.80 6.40 4.40 • 0.10-3.00 0.05-0.30
0.05-0.30
VCGT 160412-DW 16.60 9.52 4.76 1.20 6.30 5.50 • 0.10-3.00 0.05-0.30

VCGT 220516-DW 22.10 12.70 5.56 1.60 6.30 5.50 • 0.10-3.00

VCGT 220520-DW 22.10 12.70 5.56 2.00 6.20 5.50 • 0.10-3.00

VCGT 220530-DW 22.10 12.70 5.56 3.00 6.00

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/S-SVLBCR/L (114) • A/S-SVLFCR/L; A-SVUCR/L (113) • A/S-SVQCR/L (113) • AVC-SVLCR/L-VH (98) • C#-SVJCR/L (66)

• C#-SVJCR/L-JHP (66) • C#-SVVCN (69) • DTF50 SVXCR-16X2 (452) • DTF50 SVXCR-22 (452) • HSK A63WH-SVJCR/L (67) • SVJCR/L (453)
• SVJCR/L-16-JHP (454) • SVVCN (454) • SVXCR/L (454) • AVC-SVLCR/L (96)

35° 7° S 52° 50° 70°MAX
RE 4.99 MAX MAX
VCGT (PCD)
35° Rhombic Single Brazed L 7° 91° 93° 72.5º
Tip Corner Inserts for 31° 117.5°
Finishing Aluminum (PCD) D1 MAX 48°
IC MAX
112°
95º

35° 95º
MAX

107.5º

Dimensions Recommended Machining Data

ap f

Designation IC S RE L D1 ID5 (mm) (mm/rev)
ID5• 0.10-3.00
VCGT 160404D 9.52 4.76 0.40 16.60 4.40 • 0.10-3.00 0.05-0.30

VCGT 160408D 9.52 4.76 0.80 16.60 4.40 0.05-0.30

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/S-SVLBCR/L (114) • A/S-SVLFCR/L; A-SVUCR/L (113) • A/S-SVQCR/L (113) • AVC-SVLCR/L-VH (98) • C#-SVJCR/L (66)

• C#-SVJCR/L-JHP (66) • C#-SVVCN (69) • HSK A63WH-SVJCR/L (67) • SVJCR/L (453) • SVJCR/L-16-JHP (454) • SVVCN (454) • SVXCR/L (454) • AVC-SVLCR/L (96)

TCMT (PCD) 60° 7° 91º 91º 95º
Inserts with a Single PCD RE LE
Top Corner Tip, 7° Clearance 91º
and Positive Rake Angle L
for Finishing Aluminum Recommended
D1 Machining Data
7° S ap f
(mm) (mm/rev)
IC
• 0.10-3.00 0.05-0.30
Dimensions

Designation L IC S RE LE D1
2.80
TCMT 110204D 11.00 6.35 2.38 0.40 3.8

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: E-STFCR-HEAD (115) • S-STFCR/L (115) • S-STLCR/L (115) • STFCR/L (70) • STGCR/L (70)

223