Page 105 - TURNING CATALOG p121-254
P. 105
CNMA-T/M1/WG (CBN) L ICIB90 95º
80° Rhombic Inserts with a 80° LE SIB85 95º
Single CBN Top Corner Tip for RE IB20H
Machining Cast Iron, Hardened Tough 1 HardIB55 95º
Steel and Super Alloys Dimensions IB50
Recommended
ISOTURN INSERTSMachining Data
ap f
Designation L IC S RE LE (mm) (mm/rev)
3.2 • ••
CNMA 120404T 12.90 12.70 4.76 0.40 • 0.05-0.50 0.05-0.26
CNMA 120408-M1
CNMA 120408T 12.90 12.70 4.76 0.80 3.5 0.05-0.50 0.05-0.30
CNMA 120408T-WG (1) 3.4 • • •
CNMA 120412-M1 12.90 12.70 4.76 0.80 3.5 • • •• 0.05-0.50 0.05-0.30
CNMA 120412T
12.90 12.70 4.76 0.80 • 0.05-0.50 0.05-0.30
12.90 12.70 4.76 1.20 3.5 • 0.05-0.50 0.05-0.30
12.90 12.70 4.76 1.20 4.0 0.05-0.50 0.05-0.30
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
(1) Wiper insert for high feed finishing, eliminates grinding.
For tools, see pages: A/S-PCLNR/L (101) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24) • C#-PCLNR/L-X-JHP (24)
• DCLNR/L (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • PCLNR/L (20)
• PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99) • S-MULNR-MW (105) • A/S-PCLNR/L-X/G (102)
• DCLNR/L-JHP-MC (25)
CNMA-MW4 (CBN) Wiper 80º Typ. x 2 95º
80° Rhombic Inserts with 4 L S 95º
CBN Wiper Edge Tips for 80º IC
Machining Hardened Steel 88º LE 95º
Dimensions RE Recommended Machining Data
IB25HC ap f
Designation L IC S RE LE (mm) (mm/rev)
• 0.05-0.50
CNMA 120408-MW4 12.90 12.70 4.76 0.80 2.2 • 0.05-0.50 0.05-0.40
CNMA 120412-MW4 12.90 12.70 4.76 1.20 2.4 0.05-0.40
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L (101) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24) • C#-PCLNR/L-X-JHP (24)
• DCLNR/L (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • PCLNR/L (20)
• PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99) • S-MULNR-MW (105) • A/S-PCLNR/L-X/G (102)
• DCLNR/L-JHP-MC (25)
CNGA-4 (CBN) 80º Typ. x 4 95º
4-Cornered CBN Inserts for IC 95º
Machining Hardened Steel
LE 95º
L Recommended
RE S Machining Data
Dimensions Tough 1 Hard
IB25HC ap f
IB55
Designation L IC S RE LE IB10HC (mm) (mm/rev)
CNGA 120404T-MC 12.90 12.70 4.76 0.40 3.1 • 0.05-0.50 0.05-0.20
2.2 • • 0.05-0.50
CNGA 120408-M4 12.90 12.70 4.76 0.80 • 0.05-0.20
CNGA 120408T-MC 12.90 12.70 4.76 0.80 3.1 • 0.05-0.50 0.05-0.20
CNGA 120408T-WG-MC (1) 12.90 12.70 4.76 0.80 3.1 0.05-0.50 0.05-0.20
2.4 • • 0.05-0.50
CNGA 120412-M4 12.90 12.70 4.76 1.20 • 0.05-0.20
CNGA 120412T-MC 12.90 12.70 4.76 1.20 3.1 0.05-0.50 0.05-0.20
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
(1) Wiper corner configuration
For tools, see pages: A/S-PCLNR/L (101) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24) • C#-PCLNR/L-X-JHP (24)
• DCLNR/L (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • PCLNR/L (20)
• PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99) • S-MULNR-MW (105) • A/S-PCLNR/L-X/G (102)
• DCLNR/L-JHP-MC (25)
225
