Page 107 - TURNING CATALOG p121-254

CNGG-J(CBN) 80º Typ. x 2 95º ISOTURN INSERTS
80° Rhombic Inserts with 4 L S 95º
Chipbreaking CBN Tips for
Machining Hardened Steel LE 95º
IC
Recommended
RE Machining Data

Dimensions

ap f

Designation L IC S RE LE (mm) (mm/rev)

CNGG 120408-M4HM-J 12.90 12.70 4.76 0.80 1.50 0.12-0.80 0.10-0.30

• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L (101) • A/S-PCLNR/L-X/G (102) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24)
• C#-PCLNR/L-X-JHP (24) • DCLNR/L (25) • DCLNR/L-JHP-MC (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • PCLNR/L (20) • PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23)
• S-DCLNR/L (99) • S-MULNR-MW (105)

CCGW/CCMT (CBN) 80° 95º 99°
80° Rhombic Inserts with RE 95º 91°
a Single CBN Top Corner
Tip and 7° Clearance for LE L 7° 95º
Machining Hardened Steel
D1

IC S

Dimensions Tough 1 Hard Recommended
Machining Data

IB05H ap f
IB55
Designation L IC S RE LE D1 IB10H (mm) (mm/rev)

CCGW 03X102T01015-1 3.63 3.57 1.39 0.20 2.0 1.90 • • 0.05-0.50 0.05-0.20
1.90 • • 0.05-0.50
CCGW 03X104T01015-1 3.63 3.57 1.39 0.40 2.3 2.30 • • 0.05-0.50 0.05-0.20

CCGW 04T102T01015-1 4.44 4.37 1.79 0.20 2.0 2.30 • • 0.05-0.50 0.05-0.20

CCGW 04T104T01015-1 4.44 4.37 1.79 0.40 2.3 • 0.05-0.20

CCMT 060202T 6.30 6.35 2.38 0.20 2.6 2.80 • 0.05-0.50 0.05-0.20

CCMT 060204T 6.30 6.35 2.38 0.40 2.7 2.80 • 0.05-0.50 0.05-0.20

CCMT 09T304T 9.70 9.52 3.97 0.40 2.9 4.40 • 0.05-0.50 0.05-0.20

CCMT 09T308T 9.70 9.52 3.97 0.80 3.6 4.40 0.05-0.50 0.05-0.20

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/E/S-SCLCR/L (111) • C#-SCLCR/L-JHP (54) • E-SCLCR/L-HEAD (110) • NQCH-SCACR/L-JHP (55) • PCLCR/L-S (55) • PCLCR/L-S-JHP (56)

• PICIN-SCLCR/L (386) • SCACR/L-S (55) • SCLCR-PAD (55) • SCLCR/L (54) • AVC-SCLCR/L (95) • PCLCR/L-JHP-MC (56)

227