Page 96 - TURNING CATALOG p121-254

ISOTURN INSERTSWNGA-Ceramic 80° 95º 95°
Double-Sided Flat Rake Ceramic L 95°
IW7Inserts for Machining Cast Iron
IS35
IS25RES
IS8IC

IS8DimensionsTough 1 HardRecommended Machining Data
IS80
ap f
IS80
IN23DesignationL IC S RE(mm) (mm/rev)
0.80 • 0.20-0.60
IS6WNGA 080408T8.7012.704.76•••2.00-4.000.03-0.95
IN22
IN420WNGA 080412T8.7012.704.761.202.00-5.00

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/S-MWLNR/L-W (103) • A/S-PWLNR/L (104) • C#-MULNR/L-MW (16) • C#-PWLNR/L-08-JHP (9) • DWLNR/L (10)

• HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • MWLNR/L-W (18)

• PWLNR/L (8) • PWLNR/L-08-JHP (9) • PWLNR/L-X (11) • PWLNR/L-X-JHP (12) • PWLNR/L-X-JHP-MC (13) • S-DWLNR/L (99) • S-MULNR-MW (105)

• DWLNR/L-JHP-MC (10)

CNGN-Ceramic IC L 80° 95º
80° Rhombic Double-Sided RE S 95º
Ceramic Inserts with a T-Land for
Machining Cast Iron, Hardened Recommended
Steel and Nickel Based Alloys Machining Data

Dimensions Tough 1 Hard

Designation L IC S RE •• ap f

CNGN 120404T 12.90 12.70 4.76 0.40 • (mm) (mm/rev)
CNGN 120408E 12.90 12.70 4.76 0.80 • • ••• 1.00-3.00 0.10-0.43
• 1.00-3.00 0.10-0.50
CNGN 120408T 12.90 12.70 4.76 0.80 1.00-3.00 0.10-0.50
1.00-5.00 0.10-0.50
CNGN 120412E 12.90 12.70 4.76 1.20 •• 1.00-4.00 0.10-0.50
CNGN 120412T 12.90 12.70 4.76 1.20 • 1.00-5.00 0.10-0.50
1.00-4.00 0.10-0.50
CNGN 120416T 12.90 12.70 4.76 1.60 • • 1.00-4.00 0.10-0.50
CNGN 120708E 12.90 12.70 7.94 0.80 ••• 1.00-5.00 0.10-0.50
1.00-4.00 0.10-0.50
CNGN 120708T 12.90 12.70 7.94 0.80 • 1.00-5.00 0.10-0.50
CNGN 120712E 12.90 12.70 7.94 1.20 • ••

CNGN 120712T 12.90 12.70 7.94 1.20 •••
CNGN 120716T 12.90 12.70 7.94 1.60

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: CCLNR/L (88)

CNMG-Ceramic 80° 75° 95º
80° Rhombic Double-Sided 95º
Inserts with a T-Land
for Machining Cast Iron 95º
and Hardened Steel
IC 75º
RE L
S

Dimensions Tough 1 Hard Recommended Machining Data

IN23 ap f
IN22
Designation L IC S RE (mm) (mm/rev)
0.40 •
CNMG 120404T 12.90 12.70 4.76 •• 1.00-3.00 0.05-0.20

CNMG 120408T 12.90 12.70 4.76 0.80 1.00-3.00 0.05-0.20

• For user guide and cutting speed recommendations, see pages 122-134, 236-248

For tools, see pages: A/S-PCLNR/L (101) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24) • C#-PCLNR/L-X-JHP (24)

• DCBNR/L (26) • DCLNR/L (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16) • HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15)

• PCBNR/L (22) • PCLNR/L (20) • PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23) • PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99)

• S-MULNR-MW (105) • A/S-PCLNR/L-X/G (102) • DCLNR/L-JHP-MC (25)

216 ISCAR