Page 97 - TURNING CATALOG p121-254
P. 97
CNGA-Ceramic IS35 80° 75° 95º
80° Rhombic Double-Sided IS25 95º 95º
Inserts with a T-Land IS8 S
for Machining Cast Iron IC IS80 75º
and Hardened Steel RE L IS6Tough 1 Hard
IN23
Dimensions IN22 Recommended
IN420 Machining Data
ISOTURN INSERTS
ap f
Designation L IC S RE ••• (mm) (mm/rev)
CNGA 120404T 12.90 12.70 4.76 0.40 1.00-3.00 0.05-0.20
• • • • • • • • 1.00-4.00
CNGA 120408T 12.90 12.70 4.76 0.80 • •••• 0.05-0.20
CNGA 120412T 12.90 12.70 4.76 1.20 •• • 1.00-4.00 0.05-0.20
CNGA 120416T 12.90 12.70 4.76 1.60 1.00-5.00 0.05-0.20
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/S-PCLNR/L (101) • A/S-PCLNR/L-X/G (102) • C#-MULNR/L-MW (16) • C#-PCLNR/L-12-JHP (21) • C#-PCLNR/L-X (24)
• C#-PCLNR/L-X-JHP (24) • DCBNR/L (26) • DCLNR/L (25) • DCLNR/L-JHP-MC (25) • HSK A63WH-MULNR-J12MWX2 (17) • HSK A63WH-MULNR/L-MW (16)
• HSK A63WH-MUMNN-MW (17) • MULNR/L-12MW (15) • PCBNR/L (22) • PCLNR/L (20) • PCLNR/L-12-JHP (21) • PCLNR/L-X (22) • PCLNR/L-X-JHP (23)
• PCLNR/L-X-JHP-MC (23) • S-DCLNR/L (99) • S-MULNR-MW (105)
CNGX-Ceramic 80° 75° 95º
80° Rhombic Double-Sided
Dimpled Ceramic Inserts with a 75º
T-Land for Machining Cast Iron
95º
IC S
RE L
Dimensions Tough 1 Hard Recommended Machining Data
IW7 ap f
IS8
Designation L IC S IS80RE (mm) (mm/rev)
IS6••• 0.07-0.43
CNGX 120712T 12.90 12.70 7.94 1.20 ••• 1.00-3.00 0.07-0.43
CNGX 120716T 12.90 12.70 7.94 IS8
IN231.60 1.00-3.00
• For user guide and cutting speed recommendations, see pages 122-134, 236-248 IS80
IN22
For tools, see pages: TCBNR/L-CH (88) • TCKNR/L-CH (88) • TCLNR/L-CH (88)
IS6
SNGN-Ceramic IN42090° 45º 45°
Square Double-Sided Ceramic 45º 75º
Inserts with a Flat Rake for 75º
Machining Cast Iron, Hardened
Steel and Super Alloys IC=L
RE S
Dimensions Tough 1 Hard Recommended Machining Data
Designation IC S RE • ap f
SNGN 120404T 12.70 4.76 0.40 (mm) (mm/rev)
0.80 • • ••• 0.10-3.50 0.10-0.50
SNGN 120408T 12.70 4.76 1.20 • • • • • • • 0.10-3.50 0.10-0.50
0.10-5.00 0.10-0.50
SNGN 120412T 12.70 4.76 1.60 • • • •• 0.10-5.00 0.10-0.50
0.10-5.00 0.10-0.50
SNGN 120416T 12.70 4.76 0.80 • •• 0.10-5.00 0.10-0.50
0.10-5.00 0.10-0.50
SNGN 120708T 12.70 7.94 1.20 • • • 0.10-5.00 0.10-0.50
SNGN 120712T 12.70 7.94 • •
SNGN 120716T 12.70 7.94 1.60
1.20 •
SNGN 150712T 15.88 6.35
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: CSDNN-CE/CEA (89)
217
