Page 93 - TURNING CATALOG p121-254
P. 93
IC920 107.5° 27° 60°
IC20 MAX MAX
DCGT-AS 55˚ IC3207˚ 62.5º
55° Rhombic Inserts with a 7° IC IC907D1 93º
Positive Flank, Very Positive
Rake Angle and Sharp Cutting Dimensions ISOTURN INSERTS29°
Edge for Machining Aluminum MAX 93º-95º
91° 50º
MAX
RE S
L
Tough 1 Hard Recommended
Machining Data
ap f
Designation L IC S RE D1 • (mm) (mm/rev)
0.03-0.20
DCGT 070201-AS 7.75 6.35 2.38 0.10 2.80 0.50-2.00 0.05-0.20
2.80 • • 0.05-0.25
DCGT 070202-AS 7.75 6.35 2.38 0.20 • 0.50-2.00 0.05-0.25
0.05-0.26
DCGT 070204-AS 7.75 6.35 2.38 0.40 2.80 • 0.50-2.50 0.05-0.25
0.08-0.30
DCGT 11T301-AS 11.60 9.52 3.97 0.10 4.40 ••• 0.50-2.50
DCGT 11T302-AS 11.60 9.52 3.97 0.20 4.40 ••• 0.50-2.50
DCGT 11T304-AS 11.60 9.52 3.97 0.40 4.40 •• 0.50-2.50
DCGT 11T308-AS 11.60 9.52 3.97 0.80 4.40 0.80-3.00
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/E/S-SDUCR/L (112) • AVC-SDUCR/L (95) • AVC-SDUCR/L-VH (98) • C#-SDJCR-JHP (59) • C#-SDJCR/L (59)
• C#-SDNCN (64) • E-SDUCR/L-HEAD (113) • NQCH-SDACR/L-S-JHP (60) • NQCH-Y-SDJCR-S-JHP (58) • PDACR/L-JHP (62) • PDACR/L-S (57)
• SDACR/L (60) • SDHCR/L (59) • SDJCR-PAD (59) • SDJCR/L (58) • SDNCN (64) • Y-SDJCR (58) • Y-SDJCR-JHP (58) • PDACR/L-JHP-MC (62)
107.5° 27° 60°
MAX MAX
DCGT-AF 55˚ 7˚ 62.5º
Inserts with a Very Positive IC D1 93º
Rake Angle and Sharp Cutting
Edge for Semi-Finishing and Dimensions 29°
Finishing on Aluminum MAX 93º-95º
91° 50º
MAX
RE S
L
Recommended Machining Data
IC20 ap f
IC20 (mm/rev)
Designation L IC S RE D1 (mm) 0.05-0.25
4.40 • 0.50-2.50
DCGT 11T304-AF 11.60 9.52 3.97 0.40
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: A/E/S-SDUCR/L (112) • AVC-SDUCR/L (95) • AVC-SDUCR/L-VH (98) • C#-SDJCR-JHP (59) • C#-SDJCR/L (59)
• C#-SDNCN (64) • NQCH-SDACR/L-S-JHP (60) • NQCH-Y-SDJCR-S-JHP (58) • PDACR/L-JHP (62) • PDACR/L-S (57) • SDACR/L (60) • SDHCR/L (59)
• SDJCR/L (58) • SDNCN (64) • Y-SDJCR (58) • Y-SDJCR-JHP (58) • PDACR/L-JHP-MC (62)
RCGT-AS 7˚
Round Inserts with a 7° Positive D1
Flank, Very Positive Rake
Angle and Sharp Cutting Edge IC S
for Machining Aluminum
Dimensions Recommended Machining Data
Designation IC S ap f
D1 (mm)
RCGT 0803M0-AS 8.00 3.18 (mm/rev)
RCGT 1003M0-AS 10.00 3.18 3.40 • 1.00-4.00 0.20-0.40
RCGT 10T3M0-AS 10.00 3.97 4.00 • 1.00-5.00 0.20-0.40
4.40 • 1.00-5.00 0.20-0.40
• For user guide and cutting speed recommendations, see pages 122-134, 236-248
For tools, see pages: SRDCN (72) • SRGCR/L (71)
213
