Page 26 - Turning_catalog_INCH_2022_45_P261-508

GROOVE-TURN GHDR/L-JHP CWN (1) CWX 3/4” shank tools H WF (3) CWN-CWX 1.000 LH G 1/8"-28 typx2 1.140 B H WB .700 .094 .750
HF
(short pocket)
Grooving and Turning Tools
OAL
(3 inlet ports)
CDX
with Channels for High-
PSI Max
Pressure Coolant

Right-hand shown
LH
B
CDX
OAL
Designation
WF
WB
(2)
HF
.110
.157
.750
4.500
.360
GHDR/L 19-3-JHP
.750
GHDR/L 25.4-3-JHP
.094
.360
.110
1.000
1.000
1.730
.157
.950
6.000
GHDR/L 19-4-JHP
.197
.157
.400
.750
4.500
1.140
.750
.126
.690
GHDR/L 25.4-4-JHP
.400
.126
1.000
.940
6.000
1.770
1.000
.197
.157
1.000
1.000
1.000
.165
6.000
GHDR/L 25.4-5-JHP
.920
1.000
.252
.197
.500
1.810
• For using TIP and GPV inserts, toolholder seat needs to be modified according to insert profile to ensure clearance • For user guide and accessories see pages 471-490 .750
(1) Minimum cutting width
(2) Maximum cutting width
(3) Cutting depth maximum
For inserts, see pages: GIA-K (W=118-236) (309) • GIF (308) • GIF (full radius) (309) • GIF-E (W=157-236 radius) (304)
• GIF-E (W=157-236) (302) • GIM-C (577) • GIM-J (577) • GIM-J-RA/LA (578) • GIM-UT (579) • GIM-UT-RA/LA (580) • GIM-W (578)
• GIM-W-RA/LA (579) • GIMF (297) • GIMM 8CC (637) • GIMN (299) • GIMT (297) • GIMY (298) • GIMY (full radius) (300) • GIMY-F (301)
• GIP (307) • GIP (full radius) (307) • GIP-E (303) • GIP-E (full radius) (304) • GIP-UN (315) • GIPA (round W=118-236) (313)
• GIPA (W=118-236) (312) • GIPM-A46 / GIP-1250 (400) • GIPY (311) • GITM (310) • GITM (full radius) (311) • GPV (316) • TIP-MT (706)
• TIP-P-BSPT (736) • TIP-P-BSW (729) • TIP-P-ISO (717) • TIP-P-NPT (732) • TIP-P-UN (724) • TIP-WT (698)
Flow Rate vs. Pressure GHDR...-JHP
1000 psi 1450 psi 2000 psi Hose G 1/8”-28 Adaptation Nipple
Flow Rate Flow Rate Flow Rate
Designation (gallon/min) (gallon/min) (gallon/min)
GHDR/L 19-3-JHP 1.3-1.8 1.8-2.4 2.4-2.9
GHDR/L 25.4-3-JHP 1.6-2 2-2.6 2.6-3.2
GHDR/L 19-4-JHP 1.6-2.1 2.6-3.2 3.2-3.7
GHDR/L 25.4-4-JHP 2.6-3.2 3.7-4.2 4.2-4.8
GHDR/L 25.4-5-JHP 3.4-4.2 5-5.5 5.8-6.3 Plug G 1/8”-28
Copper Seal Washer 1/8” Key: HW 5.0

Spare Parts
Designation
GHDR/L 19-3-JHP SR M5X16 DIN912 HW 4.0 (a) PLG G1/8 TL360 HW 5.0
GHDR/L 25.4-3-JHP SR M5X20DIN912 HW 4.0 (a) PLG 1/8ISO1179 HW 5.0
GHDR/L 19-4-JHP SR M6X16 DIN912 PLG G1/8 TL360 HW 5.0
GHDR/L 25.4-4-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0
GHDR/L 25.4-5-JHP SR M6X20 DIN912 PLG 1/8ISO1179 HW 5.0
(a) For optional key with limited tightening torque, see page 480
286 ISCAR