Page 120 - Turning_catalog_INCH_2022_45_P509-690
P. 120
FACE GROOVING CR HFIR-M CWN (1) CW CWX (2) 5.118 .630 CWN-CWX CWN-CWX HF .985 OAL 2.638 H .787 Right-hand shown
CDX
DAXN-DAXX
Cartridges for Face
Min
Max
DAXN-DAXX
Grooving and Turning
.118
2.362
.157
B
WF
∞
.197
2.362
.236
HF
B
OAL
CDX
WF
Designation
H
.118
.787
.197
.236
.630
CR HFIR-16M
CR HFIR-20M
.787
.945
.118
.236
.787
.197
.945
2.835
• Used for shallow internal face machining to max 197" depth of groove • Inserts in 118 - 236" widths can be mounted on the cartridges
• Only DGN and GRIP 157 - 236" inserts can be used with the right-hand tools
(1) Minimum cutting width
(2) Maximum cutting width
For inserts, see pages: DGN-MF (537) • GRIPA (278) • GRIPA (full radius) (279) • HFPR/L (629) • HFPR/L (full radius) (629)
• GRIP (277) • GRIP (full radius) (278) • DGN/DGNC/DGNM-C (533) • DGN/DGNM-J/JS/JT (535) • DGN-W (534)
CR HFIR/L-M
Assembly Dimensions
F
E
45º
L1
R
M8
Assembly
Screw
Designation E L1 (1) F (2) Rmax. Assembly Screw (3)
CR HFIR/L-16M .984 .315 .787 .236 M8X30
CR HFIR/L-20M 1.181 .394 .945 .236 M8X30
(1) L adjustment ± .04
(2) F adjustment +.012
- 0
(3) Assembly screws ISO 7380 are recommended.
Spare Parts
Designation
CR HFIR-16M SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN916 HW 2.0
CR HFIR-20M SR M5X20DIN912 HW 4.0 SR 76-1401 SR M4X10 DIN913 HW 2.0
HFPN ±.004
Utility Double-Ended Face
Machining Inserts 7°
HFPN 2010
CW
RE INSL
Recommended
Dimensions
Machining Data
IC808 f groove
Designation CW RE CWTOL (1) RETOL (2) INSL (IPR)
HFPN 2002 .079 .0079 .0016 .0012 .764 • .0012-.0039
HFPN 2010 .079 .0394 .0016 .0012 .764 • .0012-.0039
• For cutting speed recommendations and user guide, see pages 658-669
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: HFFA (613) • HFFH (613)
628 ISCAR