Page 54 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN Coolant Outlet

HAPR/L H HF HFAEL
Face Machining Perpendicular B Adapter
Holders for Adapters
OAL

METRIC Left-hand shown

Designation OAL H HF B SR 14-519 T-20/3
HAPR/L 25C 124.00 25.0 25.0 25.0 SR 14-519 T-20/3
HAPR/L 32C 139.00 32.0 32.0 32.0
T-20/3
INCH T-20/3

Designation OAL H HF B

HAPR/L 25.4C 4.880 1.000 1.000 1.000 SR 14-519
HAPR/L 31.7C 5.670 1.250 1.250 1.250 SR 14-519

• Holders for adapters HFAER/L & HGAER/L, HFAIR/L & HGAIR/L.
For tools, see pages: HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HGAER/L-3 (52) • HGAIR/L-3 (57)

HGAER/L-3 DAXN-DAXX OHX CW
Adapters for External CDX OAL WF
Facing Along Shafts

METRIC Right-hand shown

Designation CDX CW DAXN(1) DAXX(2) OHX(3) WF OAL
10.2 55.00
HGAER/L 12-3M 2.00 3.00 12.0 500.0 21.0 10.2 55.00
HGAER/L 12-3T6 10.2 55.00
HGAER/L 14-3T7 6.00 3.00 12.0 15.0 21.0 10.2 55.00
HGAER/L 17-3T8 10.2 55.00
HGAER/L 21-3T9 7.00 3.00 14.0 17.0 21.0
WF OAL
8.00 3.00 17.0 21.0 21.0 .402 2.165
.402 2.165
9.00 3.00 21.0 25.0 21.0 .402 2.165
.402 2.165
INCH .402 2.165

Designation CDX CW DAXN(1) DAXX(2) OHX(3)

HGAER/L 12-3M .079 .118 .47 19.69 .827
HGAER/L 12-3T6
HGAER/L 14-3T7 .236 .118 .47 .59 .827
HGAER/L 17-3T8
HGAER/L 21-3T9 .276 .118 .55 .67 .827

.315 .118 .67 .83 .827

.354 .118 .83 .98 .827

• GRIP 3... inserts can be used with right-hand adapters only, HGPL 3 with left-hand adapters • For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Maximum overhang
For inserts, see pages: GRIP (70) • GRIP (full radius) (72) • HGPL (75)
For holders, see pages: C#-HAD (144) • C#-HAPR/L (144) • HAPR/L (52) • HAR/L (51) • IM-HAD (152) • IM-HAPR/L (152)

Spare Parts SR 16-236 P T-15/3

Designation
HGAER/L-3

52 ISCAR