Page 55 - ISCAR FACE GROOVING LINES
P. 55
HFAER/L-4 OHX CW FACE GROOVE-TURN
Adapters for External
Facing Along Shafts DAXN-DAXX
CDX OAL WF
Right-hand shown
METRIC
Designation CDX CW DAXN(1) DAXX(2) OAL OHX(3) WF
20.00 21.0 11.6 SR M5X16 DIN912 HW 4.0
HFAER/L 40-4T20 20.00 4.00 40.0 48.0 68.50 21.0 11.6 SR M5X16 DIN912 HW 4.0
HFAER/L 48-4T20 25.00 26.0 11.6 SR M5X16 DIN912 HW 4.0
HFAER/L 60-4T25 25.00 4.00 48.0 60.0 68.50 26.0 11.6 SR M5X16 DIN912 HW 4.0
HFAER/L 75-4T25
4.00 60.0 75.0 68.50
4.00 75.0 100.0 68.50
INCH
Designation CDX CW DAXN(1) DAXX(2) OAL OHX(3) WF
HFAER/L 40-4T20 .787 .157 1.57 1.89 2.697 .827 .457 SR M5X16 DIN912 HW 4.0
HFAER/L 48-4T20 .787 .157 1.89 2.36 2.697 .827 .457 SR M5X16 DIN912 HW 4.0
.984 .157 2.36 2.95 2.697 1.024 .457 SR M5X16 DIN912 HW 4.0
HFAER/L 60-4T25 .984 .157 2.95 3.94 2.697 1.024 .457 SR M5X16 DIN912 HW 4.0
HFAER/L 75-4T25
• DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades • For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Maximum overhang
For inserts, see pages: DGN-MF (80) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79)
• DGN/DGNM-J/JS/JT (82) • HGPL (75)
For holders, see pages: C#-HAD (144) • C#-HAPR/L (144) • HAPR/L (52) • HAR/L (51) • IM-HAD (152) • IM-HAPR/L (152)
HFAER/L-5T, 6T CW
Adapters for External
Facing Along Shafts DAXN-DAXX
CDX OAL WF
Right-hand shown
METRIC
Designation CW CDX DAXN(1) DAXX(2) OAL WF
5.00 25.00 70.0 95.0 66.00 12.2 EDG 33B*
HFAER/L 70C-5T25 5.00 25.00 95.0 130.0 66.00 12.2 EDG 33B*
HFAER/L 95C-5T25 6.00 28.00 70.0 100.0 69.00 12.3 EDG 33B*
HFAER/L 70C-6T28 6.00 32.00 100.0 180.0 73.00 12.3 EDG 33B*
HFAER/L 100C-6T32 6.00 32.00 180.0 400.0 73.00 12.3 EDG 33B*
HFAER/L 180C-6T32
INCH
Designation CW CDX DAXN(1) DAXX(2) OAL WF
.480 EDG 33B*
HFAER/L 70C-5T25 .197 .984 2.76 3.74 2.598 .480 EDG 33B*
.484 EDG 33B*
HFAER/L 95C-5T25 .197 .984 3.74 5.12 2.598 .484 EDG 33B*
.484 EDG 33B*
HFAER/L 70C-6T28 .236 1.102 2.76 3.94 2.717
HFAER/L 100C-6T32 .236 1.260 3.94 7.09 2.874
HFAER/L 180C-6T32 .236 1.260 7.09 15.75 2.874
• After initial groove, no limitation to widening groove outward from or toward center • Adapters can be mounted on standard HAR/L, HAPR/L, HAI holders for external
machining
• DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades • For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
* Optional, should be ordered separately
For inserts, see pages: HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79)
• DGN/DGNM-J/JS/JT (82) • DGN-W (81) • HGPL (75)
For holders, see pages: C#-HAD (144) • C#-HAPR/L (144) • HAPR/L (52) • HAR/L (51) • IM-HAD (152) • IM-HAPR/L (152)
53
