Page 200 - MILLING CATALOG p319-550
P. 200
MILLING INSERTS ONHU 0806-N-PL IC S
Octagonal Inserts with a RE
Sharp Edge and Positive
Land for Cast Iron 45° 1.3
RE APMX
Recommended Machining Data
Dimensions
IC910 ap fz
Designation IC RE S APMX (mm) (mm/t)
0.40 5.50 • 2.00-5.50
ONHU 080600-N-PL 20.20 6.00 0.25-0.40
• For cutting speed recommendations, see pages 542-547
For tools, see pages: F45NM (221) • F45WG (220)
ONHU/ONMU 080608 IC S
AN-N-HP
16MILL Double-Sided 45°
Octagonal Face Milling Inserts APMX
for High Temperature Alloys,
Stainless Steel and Steels Tough 1 Hard
Dimensions Recommended Machining Data
IC328 ap fz
IC928
Designation IC RE S APMX (mm) (mm/t)
0.80 6.00 5.50 •
ONHU 080608 AN-N-HP 20.20 0.80 2.00-5.50 0.25-0.40
ONMU 080608 AN-N-HP 20.20 5.50 • • 2.00-5.50
6.00 0.25-0.40
• For cutting speed recommendations, see pages 542-547
For tools, see pages: F45NM (221) • F45WG (220)
ONHU 0806AN-W S ...-R-W S ...-N-W ...-14R-W S
Double-Sided Octagonal
Wiper Inserts IC L 45˚ IC IC
APMX APMX BS
RE R
BS BS RE
Dimensions Tough 1 Hard Recommended Machining Data
Designation IC RE S APMX BS IC910 ap fz
7.40 IC4100
13.20 (mm) (mm/t)
ONHU 0806AN-N-W (1) 20.30 0.50 6.00 3.50 7.20 •• 1.50-3.50 0.08-0.25
• 1.50-3.50 0.08-0.25
ONHU 0806AN-14R-W (2) 20.35 0.50 5.50 3.50 • 1.50-3.50 0.08-0.25
ONHU 0806AN-R-W (3) 20.40 0.40 6.00 3.50
• For cutting speed recommendations, see pages 542-547
(1) Wiper insert with 4 cutting edges, 2 right- and 2 left-hand
(2) Wiper insert with 4 cutting edges, recommended for fine pitch cutters; cutter diameters >160 mm
(3) Wiper insert with 4 cutting edges, recommended for fine pitch cutters; cutter diameters <125 mm
For tools, see pages: F45NM (221) • F45WG (220)
516 ISCAR