Page 19 - Turning_catalog_INCH_2022_45_P261-508

INSL (Ref.) 6˚
GRIPA (full radius) ±.00098
Ground Double-Ended Full
Radius Inserts for External,
Internal and Face Machining RE BW
CW GROOVE-TURN

Dimensions Recommended Machining Data

f face-
ap f turn f groove groove f face-turn
Designation CW CWTOL (1) RE RETOL (2) INSL BW IC07 (inch) (IPR) (IPR) (IPR) (IPR)
GRIPA 3.00-1.50 .118 .00078 .0590 .0020 .628 .090 • .010-.071 .0071-.0102 .0027-.0051 .0031-.0055 .0047-.0079
GRIPA 4.00-2.00 .157 .00078 .0787 .0020 .754 .111 • .020-.094 .0079-.0134 .0035-.0067 .0039-.0079 .0055-.0122
GRIPA 5.00-2.50 .197 .00078 .0984 .0020 .754 .134 • .020-.118 .0091-.0165 .0043-.0083 .0043-.0091 .0063-.0134
GRIPA 6.00-3.00 .236 .00078 .1181 .0020 .754 .156 • .020-.142 .0094-.0197 .0051-.0098 .0043-.0102 .0075-.0161
• For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-HELIR/L (271) • C#-HFIR/L-MC (626) • CR HFIR-M (628) • DGAD/HGAD (531) • DGFH (275) • DGFH-JHP (276)
• DGFS (520) • DGTR/L (525) • HELIIR/L (379) • HELIR/L (272) • HFAER/L-4 (622) • HFAIR/L-4 (624) • HFAIR/L-DG (625) • HFFR/L-T (619)
• HFHR/L-4T (615) • HFIR/L-MC (627) • HFPAD-4 (618) • HFPAD-JHP (617) • HGAER/L-3 (621) • HGFH (274) • HGPAD (274) • HGPAD-JHP (274)
• IM-HFIR-MC (626)

OAL
TGDR/L LH
External Holders for Turning, HF H
Grooving and Profiling HBH
CDX
WF B
CWN-CWX Right-hand shown

Designation CWN (1) CWX (2) CDX (3) H HF B OAL LH WF HBH Insert
TGDR/L 1616-3M .118 .118 .295 .630 .630 .630 3.937 1.201 .583 .24 TGMF 3 SR M5X12 DIN912 HW 4.0 (a)
TGDR/L 19-3M .118 .118 .290 .750 .750 .750 5.000 1.400 .700 - TGMF 3 SR M5X12 DIN912 HW 4.0 (a)
TGDR/L 25.4-3M .118 .118 .290 1.000 1.000 1.000 5.500 1.400 .951 - TGMF 3 SR M5X12 DIN912 HW 4.0 (a)
TGDR/L 1616-4M .157 .197 .354 .630 .630 .630 3.937 1.268 .559 .24 TGMF 4/TGMF 5 SR M5X12 DIN912 HW 4.0 (a)
TGDR/L 19-4M .157 .200 .354 .750 .750 .750 5.000 1.300 .683 .24 TGMF 4/TGMF 5 SR M5X12 DIN912 HW 4.0 (a)
TGDR/L 25.4-4M .157 .200 .590 1.000 1.000 1.000 5.500 1.400 .933 - TGMF 4/TGMF 5 SR M5X12 DIN912 HW 4.0 (a)
TGDR/L 25.4-5M .200 .200 .700 1.000 1.000 1.000 5.500 1.500 .920 - TGMF 5 SR M5X12 DIN912 HW 4.0 (a)
TGDR/L 25.4-6M .236 .250 .860 1.000 1.000 1.000 6.000 1.700 .900 .32 TGMF 6 SR M6X16 DIN912 HW 5.0 (a)
TGDR/L 31.7-6M .236 .250 .860 1.250 1.250 1.250 6.000 1.700 1.150 - TGMF 6 SR M6X16 DIN912 HW 5.0 (a)
• For user guide, see pages 471-488
(1) Minimum cutting width
(2) Maximum cutting width
(3) Grooving depth is limited by the insert
(a) For optional key with limited tightening torque, see page 479
For inserts, see pages: TGMA (282) • TGMF (full radius) (282) • TGMF/P (281)

HOLDER: MAHPR WF(assembly) OAH HF
TGPAD OAL
Adapters Carrying TGMF / WF(holder) OHN CDX WF (adapter)
TGMP Groove-Turn Inserts
HOLDER: MAHL WB_2 WB CWN-CWX Left-hand shown •
WF(assembly)=WF(holder)+WF(adapter)
Designation CWN (1) CWX (2) CDX (3) WF (4) WB WB_2 OHN (5) OAL HF OAH
TGPAD 3R/L-T9 .118 .118 .354 .157 .094 .205 .500 1.465 .945 1.181
TGPAD 4R/L-T16 .157 .197 .630 .138 .134 .205 .677 1.642 .945 1.181
TGPAD 5R/L-T16 .197 .197 .630 .118 .173 .205 .677 1.642 .945 1.181
TGPAD 6R/L-T22 .236 .250 .866 .138 .197 .236 .913 1.854 .945 1.260
• For user guide, see pages 471-488
(1) Minimum cutting width
(2) Maximum cutting width
(3) Grooving depth is limited by the insert
(4) WF(adapter)
(5) Minimum overhang
For inserts, see pages: TGMA (282) • TGMF (full radius) (282) • TGMF/P (281)
279