Page 51 - Turning_catalog_INCH_2022_45_P261-508

±.001
GITM 30° .006 20° .008
(full radius) 7°
Full Radius CBN Tipped Inserts IB20H IB50 / IB10H .59 Ref.
for Grooving and Turning on
Hard Ferrous Materials 200° BW
RE CW
Hard Materials GROOVE-TURN
Dimensions Tough 1 Hard Recommended Machining Data

IB20H IB50 IB10H ap f turn f groove
Designation CW RE CWTOL (1) RETOL (2) BW DAXN (3) (inch) (IPR) (IPR)
GITM 3.00K-1.50 .118 .059 .0008 .0020 .094 6.30 • • • .000-.012 .0012-.0039 .0008-.0024
GITM 4.00K-2.00 .157 .079 .0008 .0020 .126 6.30 • • • .000-.016 .0016-.0055 .0008-.0035
GITM 5.00K-2.50 .197 .098 .0008 .0020 .154 6.30 • • .000-.020 .0020-.0071 .0012-.0043
GITM 6.00K-3.00 .236 .118 .0008 .0020 .197 6.30 • • • .000-.024 .0024-.0087 .0016-.0051
GITM 8.00K-4.00 .315 .157 .0008 .0020 .220 6.30 • .000-.031 .0031-.0114 .0020-.0067
• DMIN for internal machining = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGHN 26-M (380) • CGHN 32-DGM (382) • CGHN 32-M (381)
• CGHN-D (291) • CGHN-DG (292) • CGHN-S (291) • CGPAD (290) • CGPAD-JHP (290) • GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286)
• GHGR/L (287) • GHMPR/L (283) • GHMR/L (283) • GHSR/L (398) • GHSR/L-JHP-SL (399) • NQCH-GHSR/L-JHP (399)

±.001
GIPY
Single-Ended Full Radius Sharp 7° .197
Edged Precision Inserts for .602 Ref.
Profiling High Temperature Alloys
CW
RE BW

Dimensions Tough 1 Hard Recommended
Machining Data

(IPR)
(IPR)
Designation CW RE CWTOL (1) RETOL (2) BW IC20 IC320 IC07 IC806 IC907 IC4 IC804 f turn f groove
GIPY 3.00-1.50 .118 .059 .00078 .0020 .094 • • • • • • .0075-.0110 .0031-.0059
GIPY 4.00-2.00 .157 .079 .00078 .0020 .126 • • • • • • .0087-.0146 .0039-.0079
GIPY 5.00-2.50 .197 .098 .00078 .0020 .154 • • • • • • .0094-.0181 .0051-.0091
GIPY 6.00-3.00 .236 .118 .00078 .0020 .197 • • • • • .0102-.0216 .0059-.0106
GIPY 8.00-4.00 .315 .157 .00078 .0020 .220 • • • • • .0134-.0291 .0079-.0142
• Can cut arcs to 250° • DMIN for internal machining = 276" • For cutting speed recommendations and user guide, see pages 471-488
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: Anti-Vibration Blades (293) • C#-GHDR/L (284) • CGFG 51-P8 (634) • CGHN 26-M (380) • CGHN 32-DGM (382)
• CGHN 32-M (381) • CGHN-D (291) • CGHN-DG (292) • CGHN-P8 (292) • CGHN-S (291) • CGHR/L-P8DG (292) • CGPAD (290) • CGPAD-JHP (290)
• GHDR/L (short pocket) (285) • GHDR/L-JHP (short pocket) (286) • GHGR/L (287) • GHMPR/L (283) • GHMR/L (283) • GHSR/L (398)
• GHSR/L-JHP-SL (399) • NQCH-GHSR/L-JHP (399)

311