Page 121 - Turning_catalog_INCH_2022_45_P509-690

HFPR/L ±.004 .748 Ref. CW
Utility Double-Ended Face
Machining Inserts DAXN-DAXX 7°

RE BW
No depth penetration limit
FACE GROOVING
Dimensions Tough 1 Hard Recommended Machining Data

IC830 IC354 IC8250 IC808 IC9015 IC5010 IC806 ap f face-groove f face-turn
Designation CW RE CWTOL (1) RETOL (2) BW DAXN (3) DAXX (4) IC20 (inch) (IPR) (IPR)
HFPR/L 3003 .118 .012 .0020 .0020 .083 1.01 2.03 • • • • • • • .012-.059 .0031-.0079 .0039-.0079
HFPR/L 4004 .157 .016 .0020 .0020 .110 .95 2.90 • • • • • • • .016-.079 .0039-.0094 .0059-.0098
HFPR/L 5004 .197 .016 .0020 .0020 .134 .87 6.69 • • • • • • • • .020-.098 .0047-.0094 .0059-.0138
HFPR/L 6004 .236 .016 .0020 .0020 .157 .82 - • • • • • • • .016-.118 .0047-.0110 .0059-.0157
• For cutting speed recommendations and user guide, see pages 658-669
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter-applies to type M tools only For other tools, apply the diameter limitations that are recorded on each tool
(4) Maximum axial grooving diameter-applies to type M tools only For other tools, apply the diameter limitations that are recorded on each tool
For tools, see pages: C#-HFIR/L-MC (626) • CR HFIR-M (628) • HFAER/L-4 (622) • HFAER/L-5T, 6T (622) • HFAIR/L-4 (624) • HFAIR/L-DG (625)
• HFFR/L-T (619) • HFHPR/L-M (623) • HFHR/L-3T (614) • HFHR/L-4T (615) • HFHR/L-5T (615) • HFHR/L-6T (616) • HFHR/L-M (623)
• HFIR/L-MC (627) • HFPAD-4 (618) • HFPAD-5 (618) • HFPAD-6 (619) • HFPAD-JHP (617) • IM-HFIR-MC (626)

HFPR/L ±.004 .748 Ref. CW
(full radius)
Utility Double-Ended Full Radius DAXN-DAXX 7°
Face Machining Inserts
RE BW
No depth penetration limit
Dimensions Tough 1 Hard Recommended Machining Data

f face-
IC830 IC354 IC8250 IC808 IC9015 IC20 IC5010 IC806 ap groove f face-turn
Designation CW RE CWTOL (1) RETOL (2) BW DAXN (3) DAXX (4) (inch) (IPR) (IPR)
HFPR/L 3015 .118 .059 .0020 .0020 .083 1.01 2.03 • • • • • • • .000-.059 .0031-.0079 .0047-.0079
HFPR/L 4020 .157 .079 .0020 .0020 .110 .95 2.90 • • • • • • • .000-.079 .0039-.0094 .0059-.0098
HFPL 5025 .197 .098 .0020 .0020 .134 .87 6.69 • • • • • • • .000-.098 .0047-.0094 .0059-.0138
HFPR 5025 .197 .098 .0020 .0020 .134 .87 6.69 • • • • • • • .000-.098 .0047-.0094 .0059-.0138
HFPR/L 6030 .236 .118 .0020 .0020 .157 .82 - • • • • • • • .000-.118 .0047-.0110 .0079-.0157
• For cutting speed recommendations and user guide, see pages 658-669
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
(3) Minimum axial grooving diameter-applies to type M tools only For other tools, apply the diameter limitations that are recorded on each tool
(4) Maximum axial grooving diameter-applies to type M tools only For other tools, apply the diameter limitations that are recorded on each tool
For tools, see pages: C#-HFIR/L-MC (626) • CR HFIR-M (628) • HFAER/L-4 (622) • HFAER/L-5T, 6T (622) • HFAIR/L-4 (624) • HFAIR/L-DG (625)
• HFFR/L-T (619) • HFHPR/L-M (623) • HFHR/L-3T (614) • HFHR/L-4T (615) • HFHR/L-5T (615) • HFHR/L-6T (616) • HFHR/L-M (623)
• HFIR/L-MC (627) • HFPAD-4 (618) • HFPAD-5 (618) • HFPAD-6 (619) • HFPAD-JHP (617) • IM-HFIR-MC (626)

629