Page 123 - Turning_catalog_INCH_2022_45_P509-690

GRIP ±.004 INSL (Ref.)
(full radius)
Utility Double-Ended Full 7°
Radius Inserts for External, CW
Internal and Face Machining RE BW

No depth penetration limit FACE GROOVING
Dimensions Tough 1 Hard Recommended Machining Data

f face-
IC830 IC8250 IC08 IC808 IC908 IC418 IC5010 IC806 IC807 IC804 ap f turn f groove groove f face-turn
Designation CW RE CWTOL (1) RETOL (2) INSL BW (inch) (IPR) (IPR) (IPR) (IPR)
GRIP 3015Y .118 .059 .0020 .0020 .622 .083 • • • • • • • • • • .000-.059 .0071-.0102 .0027-.0051 .0031-.0079 .0039-.0079
GRIP 318-159Y .125 .063 .0020 .0020 .622 .091 • • • .000-.059 .0075-.0110 .0027-.0051 .0031-.0079 .0039-.0079
GRIP 4020Y .157 .079 .0020 .0020 .748 .110 • • • • • • • • • • .000-.079 .0079-.0134 .0035-.0067 .0039-.0094 .0059-.0118
GRIP 476-238Y .187 .094 .0020 .0020 .748 .126 • • • • .000-.091 .0083-.0157 .0039-.0079 .0039-.0094 .0059-.0118
GRIP 5025Y .197 .098 .0020 .0020 .748 .134 • • • • • • • • .000-.098 .0091-.0165 .0043-.0083 .0047-.0094 .0059-.0138
GRIP 6030Y .236 .118 .0020 .0020 .748 .165 • • • • • • • • • .000-.118 .0094-.0197 .0051-.0098 .0047-.0110 .0059-.0157
GRIP 635-318Y .250 .125 .0020 .0020 .748 .157 • • • .000-.122 .0098-.0209 .0055-.0106 .0047-.0110 .0059-.0157
• For cutting speed recommendations and user guide, see pages 658-669
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-HELIR/L (271) • C#-HFIR/L-MC (626) • CR HFIR-M (628) • D/HGAD RE/LE-JHP (553) • DGAD/HGAD (531)
• DGFH (275) • DGFH-JHP (276) • DGFS (520) • DGTR/L (525) • HELIIR/L (379) • HELIR/L (272) • HFAER/L-4 (622) • HFAER/L-5T, 6T (622)
• HFAIR/L-4 (624) • HFAIR/L-DG (625) • HFFR/L-T (619) • HFHR/L-4T (615) • HFHR/L-5T (615) • HFHR/L-6T (616) • HFIR/L-MC (627)
• HFPAD-3 (617) • HFPAD-4 (618) • HFPAD-5 (618) • HFPAD-6 (619) • HFPAD-JHP (617) • HGAER/L-3 (621) • HGAIR/L-3 (624) • HGFH (274)
• HGHR/L-3 (614) • HGPAD (274) • HGPAD-JHP (274) • IM-HFIR-MC (626)

HGPL ±.004 INSL CW
Utility Double-Ended Inserts 7°
for Face Machining BW
RE
CW

Dimensions Tough 1 Hard Recommended Machining Data

IC328 IC354 IC08 IC808 IC908 IC806 ap f face-groove f face-turn
Designation CW BW RE CWTOL (1) RETOL (2) INSL (inch) (IPR) (IPR)
HGPL 3015Y .118 .083 .059 .0012 .0020 .630 • • .000-.059 .0031-.0079 .0047-.0091
HGPL 3002Y .118 .091 .008 .0012 .0020 .630 • • • • .009-.071 .0031-.0079 .0047-.0091
HGPL 3003Y .118 .091 .012 .0012 .0020 .630 • • • • • .014-.071 .0031-.0079 .0047-.0091
HGPL 4002Y .157 .110 .008 .0012 .0020 .748 • • • • .009-.094 .0039-.0094 .0063-.0118
HGPL 4004Y .157 .110 .016 .0012 .0020 .748 • • • • .019-.094 .0039-.0094 .0063-.0118
HGPL 4020Y .157 .110 .079 .0012 .0020 .748 • • • .000-.079 .0039-.0094 .0063-.0118
HGPL 5005Y .197 .130 .020 .0012 .0020 .748 • • • .024-.118 .0047-.0094 .0079-.0150
HGPL 5025Y .197 .130 .098 .0012 .0020 .748 • • • .000-.098 .0047-.0094 .0079-.0150
HGPL 6005Y .236 .165 .020 .0012 .0020 .748 • • • • .024-.142 .0047-.0110 .0094-.0177
HGPL 6030Y .236 .165 .118 .0012 .0020 .748 • • • .000-.118 .0047-.0110 .0094-.0177
• No depth penetration limit • For cutting speed recommendations and user guide, see pages 658-669
(1) Cutting width tolerance (+/-)
(2) Corner radius tolerance (+/-)
For tools, see pages: C#-HFIR/L-MC (626) • HFAER/L-4 (622) • HFAER/L-5T, 6T (622) • HFAIR/L-4 (624) • HFAIR/L-DG (625) • HFFR/L-T (619)
• HFHR/L-4T (615) • HFHR/L-5T (615) • HFHR/L-6T (616) • HFIR/L-MC (627) • HFPAD-3 (617) • HFPAD-4 (618) • HFPAD-5 (618) • HFPAD-6 (619)
• HFPAD-JHP (617) • HGAER/L-3 (621) • HGAIR/L-3 (624) • HGHR/L-3 (614)

631