Page 52 - ISCAR FACE GROOVING LINES

FACE GROOVE-TURN Holder: MAHPL Holder: MAHR
CDX
HFPAD-5 HF OAH
Adapters for Face Machining WF(assembly) WF (adapter) OAL D
DAXN-DAXX

OHN

CW WB_2 Left-hand shown

METRIC

Designation DAXN(1) DAXX(2) CW CDX OHN(3) WF(4) WB_2 OAL HF OAH

HFPAD 5R/L-40-T14 40.0 50.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0

HFPAD 5R/L-50-T14 50.0 75.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0

HFPAD 5R/L-75-T14 75.0 110.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0

HFPAD 5R/L-110-T14 110.0 200.0 5.00 14.00 16.0 4.50 6.3 40.50 24.0 32.0

HFPAD 5R/L-200-T20 200.0 800.0 5.00 20.00 21.0 4.50 6.6 45.50 24.0 32.0

INCH

Designation DAXN(1) DAXX(2) CW CDX OHN(3) WF(4) WB_2 OAL HF OAH
1.260
HFPAD 5R/L-40-T14 1.57 1.97 .197 .551 .630 .177 .248 1.594 .945 1.260
HFPAD 5R/L-50-T14 1.260
1.97 2.95 .197 .551 .630 .177 .248 1.594 .945 1.260
HFPAD 5R/L-75-T14 1.260
2.95 4.33 .197 .551 .630 .177 .248 1.594 .945
HFPAD 5R/L-110-T14
HFPAD 5R/L-200-T20 4.33 7.87 .197 .551 .630 .177 .248 1.594 .945

7.87 31.50 .197 .787 .827 .177 .260 1.791 .945

• WF(assembly)=WF(shank) + WF(adapter) • DGN & GRIP 5.. inserts can be used only with right-hand adapters, HGPL 5.. inserts with left-hand adapters
• For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Minimum overhang
(4) WF(adapter)
For inserts, see pages: GRIPA (73) • GRIPA (full radius) (74) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72)
• DGN/DGNC/DGNM-C (79) • DGN/DGNM-J/JS/JT (82) • DGN-W (81) • HGPL (75)
For holders, see pages: C#-MAHD-JHP (140) • C#-MAHPD-JHP (141) • IH-HFPAD (59) • MAHR/L-JHP-MC (158) • MAHPR/L-JHP (154)
• MAHR/L-JHP (157) • MAHR/L (156) • MAHPR/L (153) • C#-MAHD (139) • C#-MAHDOR (139) • C#-MAHPD (141) • C#-MAHDR-45 (138)
• HSK A63WH-MAHUR/L (148) • HSK A63WH-MAHDR-45 (147) • HSK A63WH-MAHDOR (147) • IM-MAHD (150) • IM-MAHPD (151)

Holder: MAHPL Holder: MAHR
CDX
HFPAD-6 HF OAH
Adapters for Face Machining WF(assembly) WF (adapter) OAL D
DAXN-DAXX

OHN

CW WB_2 Left-hand shown

METRIC

Designation DAXN(1) DAXX(2) CW CDX OHN(3) WF(4) WB_2 OAL HF OAH

HFPAD 6R/L-60-T14 60.0 100.0 6.00 14.00 16.0 4.50 6.8 40.50 24.0 32.0

HFPAD 6R/L-100-T20 100.0 200.0 6.00 20.00 21.0 4.50 6.8 45.50 24.0 32.0

HFPAD 6R/L-200-T20 200.0 3000.0 6.00 20.00 21.0 4.50 7.1 45.50 24.0 32.0

INCH

Designation DAXN(1) DAXX(2) CW CDX OHN(3) WF(4) WB_2 OAL HF OAH

HFPAD 6R/L-60-T14 2.36 3.94 .236 .551 .630 .177 .268 1.594 .945 1.260
HFPAD 6R/L-100-T20
3.94 7.87 .236 .787 .827 .177 .268 1.791 .945 1.260
HFPAD 6R/L-200-T20
7.87 118.11 .236 .787 .827 .177 .280 1.791 .945 1.260

• WF(assembly)=WF(shank) + WF(adapter) • DGN & GRIP 6.. inserts can be used only with right-hand adapters, HGPL 6.. inserts with left-hand adapters
• For user guide, see pages 161-173
(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Minimum overhang
(4) WF(adapter)
For inserts, see pages: HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79) • DGN/DGNM-J/JS/JT (82) • HGPL (75)
For holders, see pages: C#-MAHD-JHP (140) • C#-MAHPD-JHP (141) • IH-HFPAD (59) • MAHR/L-JHP-MC (158) • MAHPR/L-JHP (154)
• MAHR/L-JHP (157) • MAHR/L (156) • MAHPR/L (153) • C#-MAHD (139) • C#-MAHPD (141) • C#-MAHDR-45 (138) • C#-MAHDOR (139)
• HSK A63WH-MAHUR/L (148) • HSK A63WH-MAHDR-45 (147) • HSK A63WH-MAHDOR (147) • IM-MAHD (150) • IM-MAHPD (151)

50 ISCAR