Page 53 - ISCAR FACE GROOVING LINES

HFFR/L-T CDX CW L FACE GROOVE-TURN
Blades for Face Machining DAXN-DAXX HF H R
WB_2
OAL 150°

Right-hand shown

METRIC

Designation CW DAXN(2) DAXX(3) CDX OAL HF H WB_2
24.8 32.0 5.2
HFFR/L 48-4T25 (1) 4.00 48.0 60.0 25.00 150.00 24.8 32.0 5.2 EDG 33B*
HFFR/L 60-4T25 24.8 32.0 5.2 EDG 33B*
HFFR/L 75-4T30 4.00 60.0 75.0 25.00 150.00 24.8 32.0 3.2 EDG 33B*
HFFR/L 140-4T30 24.8 32.0 5.2 EDG 33B*
HFFR/L 70-5T32 4.00 75.0 140.0 30.00 150.00 24.8 32.0 5.2 EDG 33B*
HFFR/L 95-5T35 24.8 32.0 5.2 EDG 33B*
HFFR/L 130-5T38 4.00 140.0 1500.0 30.00 150.00 24.8 32.0 4.0 EDG 33B*
HFFR/L 180-5T38 24.8 32.0 5.2 EDG 33B*
HFFR/L 90-6T32 5.00 70.0 95.0 32.00 150.00 24.8 32.0 5.2 EDG 33B*
HFFR/L 180-6T38 EDG 33B*
5.00 95.0 130.0 35.00 150.00

5.00 130.0 180.0 38.00 150.00

5.00 180.0 1500.0 38.00 150.00

6.00 90.0 180.0 32.00 150.00

6.00 180.0 400.0 38.00 150.00

INCH

Designation CW DAXN(2) DAXX(3) CDX OAL HF H WB_2
.205
HFFR/L 48-4T25 (1) .157 1.89 2.36 .984 5.906 .976 1.260 .205 EDG 33B*
HFFR/L 60-4T25 .205 EDG 33B*
HFFR/L 75-4T30 .157 2.36 2.95 .984 5.906 .976 1.260 .126 EDG 33B*
HFFR/L 140-4T30 .205 EDG 33B*
HFFR/L 70-5T32 .157 2.95 5.51 1.181 5.906 .976 1.260 .205 EDG 33B*
HFFR/L 95-5T35 .205 EDG 33B*
HFFR/L 130-5T38 .157 5.51 59.06 1.181 5.906 .976 1.260 .157 EDG 33B*
HFFR/L 180-5T38 .205 EDG 33B*
HFFR/L 90-6T32 .197 2.76 3.74 1.260 5.906 .976 1.260 .205 EDG 33B*
HFFR/L 180-6T38 EDG 33B*
.197 3.74 5.12 1.378 5.906 .976 1.260

.197 5.12 7.09 1.496 5.906 .976 1.260

.197 7.09 59.06 1.496 5.906 .976 1.260

.236 3.54 7.09 1.260 5.906 .976 1.260

.236 7.09 15.75 1.496 5.906 .976 1.260

• After initial groove, no limitation to widening groove outward or toward center.
• DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades
• For user guide, see pages 161-173
(1) HGPL 4...Y with LH blade
(2) Minimum penetration diameter
(3) Maximum penetration diameter
* Optional, should be ordered separately
For inserts, see pages: DGN-MF (80) • HFPR/L (68) • HFPR/L (full radius) (69) • GRIP (70) • GRIP (full radius) (72) • DGN/DGNC/DGNM-C (79)
• DGN/DGNM-J/JS/JT (82) • DGN-W (81) • HGPL (75)
For holders, see pages: SGTBF (136) • SGTBU/SGTBN (133) • UBHCR/L (135)

Coolant Outlet

HAR/L H HF HFAEL
Face Machining Adapter Holders Adapter

OAL OAW
B

Right-hand shown

METRIC

Designation OAL B H HF OAW SR 14-519 T-20/3
HAR/L 25C 110.00 25.0 25.0 25.0 39.00 SR 14-519 T-20/3
HAR/L 32C 130.00 32.0 32.0 32.0 46.00

INCH

Designation OAL B H HF OAW SR 14-519 T-20/3
HAR/L 25.4C 5.500 1.000 1.000 1.000 1.550 SR 14-519 T-20/3
HAR/L 31.7C 6.300 1.250 1.250 1.250 1.800

• Holders for adapters HFAER/L & HGAER/L, HFAIR/L & HGAIR/L
For tools, see pages: HFAER/L-4 (53) • HFAER/L-5T, 6T (53) • HFAIR/L-4 (60) • HFAIR/L-DG (61) • HGAER/L-3 (52) • HGAIR/L-3 (57)

51