Page 145 - MILLING CATALOG p319-550
P. 145
W1 IC28
APCR 1604 APMX INSL Rd°MILLING INSERTS
Super Positive and Polished Rake
Insert for Machining Aluminum Recommended
and High Temperature Alloys Machining Data
ap fz
BS RE S (mm) (mm/t)
Dimensions • 1.20-14.00 0.15-0.25
Designation INSL APMX W1 RE BS S
APCR 1604PDFR-P 17.92 14.00 9.45 0.80 1.80 5.70
• For cutting speed recommendations, see pages 542-547
P290 ACKT lNSL Rd°
Single-Sided Rectangular Inserts
with 2 Serrated Cutting Edges Recommended
Machining Data
BS RE BS S
W1
P290 ACKT 1806PDR-FWR
Dimensions Tough 1 Hard
IC28 ap fz
IC882
Designation W1 INSL S RE(5) BS IC330 (mm) (mm/t)
IC840
IC830
IC380
IC808
IC810
P290 ACKT 1204PDR-FW 8.20 12.80 4.40 0.90 1.50 •• • • • 3.00-12.00 0.08-0.12
P290 ACKT 1204PDR-FWP 8.20 12.80 4.40 0.90 1.50 3.00-12.00 0.08-0.12
P290 ACKT 1806PDR-FW 10.70 18.50 6.00 1.20 2.00 • • • • • 5.00-18.00 0.08-0.12
P290 ACKT 1806PDR-FWE (1) 10.70 18.50 6.00 1.20 2.00 • •• 5.00-18.00 0.08-0.12
P290 ACKT 1806PDR-FWE-P (2) 10.70 18.50 6.00 1.20 2.00 •
• 5.00-18.00 0.08-0.12
P290 ACKT 1806PDR-FWP (3) 10.70 18.50 6.00 1.20 2.00 5.00-18.00 0.08-0.12
10.70 20.20 6.00 3.80 1.90 • • 5.00-18.00 0.08-0.12
P290 ACKT 1806PDR-FWR (4)
• For cutting speed recommendations, see pages 542-547
(1) A sharp edged insert, for long overhang applications or when machine power is limited
(2) Polished rake, used for rough milling of aluminum
(3) For titanium and austenitic stainless steel
(4) To be used only on the tool's first row for rough cutting when the required final corner radius should be up to 4 mm
(5) Radius for programming
For tools, see pages: P290 ACK (241) • P290 ACK-C#-18 (242) • P290 ACK-M (240) • P290 EPW (34) • P290 EPW-M (35) • P290 FPW/FCT (215) • P290 SM (242)
RE
P290 ACCT/KT lNSL Rd°
Single-Sided Rectangular
Inserts with Two 12 and 18 Recommended
mm Straight Cutting Edges Machining Data
BS S
W1
Dimensions Tough 1 Hard
IC28 ap fz
IC830
Designation W1 INSL S RE BS IC808 (mm) (mm/t)
IC810
P290 ACCT 1204PDR-TL 8.20 12.90 4.80 0.90 1.50 • 1.00-12.00 0.06-0.10
•
P290 ACCT 1204PDR-HL 8.20 13.00 4.80 0.40 2.20 ••• 1.00-12.00 0.06-0.10
P290 ACCT 1806PDR-HL 10.75 19.40 6.50 0.80 2.50 5.00-18.00 0.08-0.12
2.50 •
P290 ACCT 1806PDR-HL-P 10.75 19.40 6.50 0.80 •• 5.00-18.00 0.08-0.12
P290 ACCT 1806PDR-TL 10.75 19.40 6.50 1.20 2.00 • 5.00-18.00 0.08-0.12
P290 ACKT 1806PDR-HL (1) 10.75 19.40 6.50 0.80 2.50 5.00-18.00 0.08-0.12
• HL - For finishing applications (ae max=1 mm) • HL-P - Polished rake, used for aluminum • TL- Reinforced straight cutting edges, designed for rough and semi-finishmilling
• For cutting speed recommendations, see pages 542-547
(1) Economic insert
For tools, see pages: P290 ACK (241) • P290 ACK-C#-18 (242) • P290 ACK-M (240) • P290 EPW (34) • P290 EPW-M (35) • P290 FPW/FCT (215) • P290 SM (242)
461
