Page 144 - MILLING CATALOG p319-550
P. 144
MILLING INSERTS W1
HM90 ADKT 1505PD-W M90 APMX lNSL
Wiper Insert for High W
Surface Finish W
M90BS RE
RE820 W
S
Dimensions Recommended
Machining Data
IC908 ap fz
(mm/t)
Designation W1 INSL APMX S BS RE (mm) 0.15-0.30
0.80 • 0.10-1.00
HM90 ADKT 1505PD-W 9.52 16.75 15.00 5.83 5.92
• Must be used together with HM90 ADKT 1505PDR inserts. • Use a single wiper insert per tool. • For cutting speed recommendations, see pages 542-547.
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210)
W1
ADKT 1505PD-W APMX INSL
Wiper Insert for High BS RE
Surface Finish
RE820
S
Dimensions Tough 1 Hard Recommended
Machining Data
IC328 ap fz
IC928 (mm/t)
Designation W1 INSL APMX S BS RE (mm) 0.15-0.30
1.00 • • 0.10-1.00
ADKT 1505PD-W 9.57 16.00 14.63 5.60 6.53
• Must be used together with ADKT 1505PDR inserts. • For cutting speed recommendations, see pages 542-547.
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210)
W1
APKT 1604 HM 76
Milling Inserts with a 16 mm
Cutting Edge Length and Positive APMX INSL RE RE Rd°
Rake Angle for General Use 25˚
S Recommended
BS RE Machining Data
Dimensions Tough 1 Hard
IC328 ap fz
IC928
Designation RE W1 INSL S BS APMX IC250 (mm) (mm/t)
IC950
APKT 1604PDL-HM IC30N
APKT 1604PDR-HM IC910
APKT 1604PDR-76 IC520M
APKT 160416R-HM IC20
APKT 160424R-HM
APKT 160432L-HM 0.80 9.45 17.20 5.25 1.70 14.00 • 1.20-14.00 0.08-0.15
APKT 160432R-HM 0.80 9.45 17.20 5.25 1.78 14.00 • • • • • 1.20-14.00 0.08-0.15
APKT 160448R-HM 0.80 9.45 17.30 5.30 1.80 14.00 • • • 1.20-14.00 0.10-0.20
1.60 9.45 16.70 5.30 0.00 14.00 • •
2.00-14.00 0.08-0.15
• 2.80-14.00 0.08-0.15
2.40 9.45 16.70 5.30 0.00 14.00
3.10 9.45 16.60 5.30 0.00 14.00 •
3.20 9.45 16.60 5.30 0.00 14.00 • 3.60-14.00 0.08-0.15
• 3.60-14.00 0.08-0.15
4.80 9.45 16.40 5.20 0.00 14.00 5.20-14.00 0.08-0.15
• For cutting speed recommendations, see pages 542-547
APKT 1604-76 APKT 1604...-HM
460 ISCAR
