Page 140 - MILLING CATALOG p319-550
P. 140
MILLING INSERTS W1 Rd°
HM90 ADCR 1505PDFR-P APMX INSL Recommended
Peripherally Ground Insert with Machining Data
a Super Positive Polished Rake BS RE
for Machining Aluminum and
High Temperature Alloys Dimensions
S
Tough 1 Hard
IC28 IC28 ap fz
IC928 IC08
Designation W1 INSL APMX S RE BS • • (mm) (mm/t)
HM90 ADCR 1505PDFR-P 9.55 16.50 12.00 6.90 0.80 4.00 1.20-12.00 0.07-0.25
• Super positive chipformer peripherally ground (P - Polished rake) • Used for machining aluminum, titanium and magnesium
• For cutting speed recommendations, see pages 542-547
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210) • HM90 F90A-15-JHP (210)
W1 Rd°
ADCR 1505PDFR APMX INSL Recommended
Super Positive Precision Inserts Machining Data
for Aluminum, Stainless Steel
and High Temperature Alloys
BS RE S
Dimensions Tough 1 Hard
ap fz
Designation W1 INSL APMX S RE BS (mm) (mm/t)
• 1.20-12.00 0.15-0.25
ADCR 1505PDFR 9.50 15.95 12.00 5.64 0.80 1.60 0.07-0.25
1.60 •
ADCR 1505PDFR-P (1) 9.50 15.95 12.00 5.64 0.80 1.20-12.00
• For cutting speed recommendations, see pages 542-547
(1) Polished rake, used on titanium magnesium and aluminum
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210) • SM (250)
ADKR 1505PDR/L-HM W1
Super Positive Inserts for
Machining Aluminum, Stainless APMX INSL Rd°
Steel and High Temperature Alloys
Recommended
BS RE S Machining Data
Dimensions Tough 1 Hard
IC28 ap fz
IC328
Designation W1 INSL APMX S RE BS IC928 (mm) (mm/t)
IC950
ADKR 1505PDL-HM (1) 9.60 15.95 12.00 6.00 0.80 1.60 • 1.20-12.00 0.07-0.15
1.60 • • •
ADKR 1505PDR-HM 9.60 15.95 12.00 6.00 0.80 1.20-12.00 0.07-0.15
1.60 • • • 0.80-12.00 0.07-0.15
ADKR 150504PDR-HM 9.92 16.30 12.00 5.63 0.40
• For cutting speed recommendations, see pages 542-547
(1) PDL - Left-hand inserts are used only for special tools.
For tools, see pages: ETS (341) • F90AD-SFR (211) • FST (361) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210) • SM (250)
456 ISCAR