Page 142 - MILLING CATALOG p319-550
P. 142
MILLING INSERTS W1
ADKT 1505PDR/L-HM APMX INSL Rd°
Inserts with 2 Helical Cutting
Edges for General Use Recommended
Machining Data
BS RE S
Dimensions Tough 1 Hard
IC28 ap fz
IC328
Designation W1 INSL APMX S RE BS IC928 (mm) (mm/t)
IC250 0.08-0.15
IC950 0.08-0.15
IC908
IC30N
IC910
IC520M
IC20
ADKT 1505PDR-HM 9.57 15.65 12.00 5.64 0.80 1.60 • • • • • • • • • 1.20-12.00
ADKT 1505PDL-HM (1) 9.57 15.70 12.00 5.64 0.80 1.60 ••
1.20-12.00
• For cutting speed recommendations, see pages 542-547
(1) PDL - Left-hand inserts are used only for special tools.
For tools, see pages: E90AC (36) • ETS (341) • F90AD-SFR (211) • FST (361) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32)
• HM90 F90A-15 (210) • HM90 F90A-15-JHP (210) • SM (250)
ADMT 1505PDR-HS W1 Rd°
Inserts with a Chip
Splitting Serrated Cutting APMX INSL Recommended
Edge for Roughing S BS RE Machining Data
Dimensions Tough 1 Hard
IC328 ap fz
IC928
Designation W1 INSL APMX S RE BS IC250 (mm) (mm/t)
IC950
ADMT 1505PDR-HS 9.60 15.85 12.00 5.92 0.80 2.00 • • • • 12.00-12.00 (1) 0.10-0.20
• Self-balanced forces on rake face. Use for long overhang and extended flute cutters for reduced chattering. • For cutting speed recommendations, see pages 542-547
(1) Machine with maximum depth of cut
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210) • SM (250)
W1
ADKT 1505PDTR/L-RM APMX INSL Rd°
Inserts with Reinforced Helical
Cutting Edge for Interrupted RE Recommended
Cut and Heavy Machining Machining Data
BS RE S
Dimensions Tough 1 Hard
Designation W1 INSL S BS RE APMX IC328 ap fz
ADKT 1505PDTR-RM IC928
ADKT 1505PDTL-RM (1) IC250 (mm) (mm/t)
IC950 1.40-12.00 0.10-0.20
IC910 1.40-12.00 0.10-0.20
IC520M
DT7150
9.54 15.75 5.63 1.60 1.00 12.00 • • • • • • •
9.54 15.80 5.63 1.60 1.00 12.00 •
• For cutting speed recommendations, see pages 542-547
(1) PDTL-Left-hand inserts are used only for special tools.
For tools, see pages: ETS (341) • F90AD-SFR (211) • FST (361) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32)
• HM90 F90A-15 (210) • HM90 F90A-15-JHP (210) • SM (250)
458 ISCAR