Page 141 - MILLING CATALOG p319-550
P. 141
W1 IC28
IC328
ADCT 1505PDFR-HM APMX INSL IC928 Rd°
Peripherally Ground Milling Inserts
for Finishing and General Use MILLING INSERTSRecommended
Machining Data
BS RE S
Dimensions Tough 1 Hard
ap fz
(mm/t)
Designation W1 INSL APMX S RE BS ••• (mm) 0.06-0.12
ADCT 1505PDFR-HM 9.57 15.65 12.00 5.64 0.80 1.60 1.20-12.00
For tools, see pages: E90AC (36) • F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210) • SM (250)
ADKW (CBN) RE0.8 W1 Rd°
Single Corner R.H. Inserts with APMX BS
an IB85 PCBN Brazed Tip for Recommended Machining Data
Machining Hard Materials 5.0 INSL
S
Dimensions
IB85 ap fz
Designation W1 INSL S BS APMX (mm) (mm/t)
2.00 • 0.10-2.00 0.10-0.25
ADKW 1505 PDER 9.60 16.18 5.83 1.45 2.00 • 0.10-2.00 0.10-0.25
ADKW 1505 PDTR 9.60 16.18 5.83 1.45
• Inserts are supplied with spare screws. • For cutting speed recommendations, see pages 542-547
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210)
0.2x45° 0.15x45° RE0.8 W1 Rd°
2.0 5.0 BS
ADKW (PCD) APMX
Single Corner R.H. PCD Tipped 15º INSL
Inserts for Milling Aluminum
S
150502x45PDR 1505-75RM PDR 150508PDR
Dimensions Tough 1 Hard Recommended Machining Data
ID8 ap fz
ID5 (mm/t)
0.10-0.25
Designation W1 INSL S APMX BS (mm) 0.10-0.25
• 0.10-2.00 0.10-0.25
ADKW 1505-75RM PDR 9.60 16.18 5.83 2.00 2.00 • 0.10-2.00
Cutting Edge
ADKW 150502X45 PDR 9.60 16.18 5.83 2.00 2.00 ••
Sharp
ADKW 150508 PDR 9.60 16.18 5.83 2.00 1.52 0.10-2.00
• The inserts are supplied with spare screws. • For cutting speed recommendations, see pages 542-547
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210)
PCD
Recommended Machining Conditions
Grade D.O.C. (ap) mm Material Vc m/min Feed mm/tooth
0.05-0.25
N ID5 <2.0 Aluminum alloys <12% silicon 300-3000
<2.0 Chipboard, fiberboard and plastics 2000-3000
<2.0 500-1500
<2.0 Copper alloys and brass 250-1000
<2.0 Aluminum>12% silicon 300-3000
N ID8 Aluminum<12% silicon 2000-3000
<2.0 Chipboard, fiberboard and plastics
200-600
MMC
457