Page 147 - MILLING CATALOG p319-550
P. 147
W1 IC328
IC928
3M AXKT 1304..R-PDRMM APMX INSL
High Durability Inserts MILLING INSERTS
with a Variety of Corner
Radii for Heavy Milling
BS RE S
Dimensions Tough 1 Hard Recommended
Machining Data
ap fz
Designation W1 RE INSL APMX S BS • • (mm) (mm/t)
3M AXKT 130408R-PDRMM 8.40 0.80 14.12 12.00 4.54 1.40 • • 1.20-12.00 0.10-0.22
3M AXKT 130412R-PDRMM 8.40 1.20 13.50 12.00 4.42 1.20 • • 1.60-12.00 0.15-0.30
3M AXKT 130416R-PDRMM 8.40 1.60 13.50 12.00 4.36 0.80 • 2.00-12.00 0.15-0.30
3M AXKT 130424R-PDRMM 8.40 2.40 13.50 12.00 4.18 - 2.80-12.00 0.15-0.30
• Reduce feed by 50% during engagement and exit from the workpiece; this practice will substantially increase insert life • Inserts with corner radii larger than 0.8 mm should
be used on 3M SM-13 and 3M AXK tools only on the face of the cutter • For cutting speed recommendations, see pages 542-547.
W1
3M AXKT 2006..R-PDR APMX INSL
High Durability Inserts
with a Variety of Corner
Radii for Heavy Milling
BS RE S
Dimensions Tough 1 Hard Recommended
Machining Data
IC328 ap fz
IC928
Designation W1 RE INSL APMX S BS (mm) (mm/t)
13.50 1.20 22.00 20.00 6.75 • •
3M AXKT 200612R-PDR 13.50 1.60 21.80 20.00 6.62 2.20 • 1.60-20.00 0.15-0.30
3M AXKT 200616R-PDR 13.50 2.40 22.00 20.00 6.55
3M AXKT 200624R-PDR 13.50 3.20 22.00 20.00 6.46 2.00 • 2.00-20.00 0.15-0.30
3M AXKT 200632R-PDR 13.50 4.00 21.90 20.00 6.26
3M AXKT 200640R-PDR 1.55 • 2.80-20.00 0.15-0.30
0.90 • • 3.60-20.00 0.15-0.30
- 4.40-20.00 0.15-0.30
• Reduce feed by 50% during engagement and exit from the workpiece. This practice will substantially increase insert life. • Inserts with corner radii larger than 0.8 mm should
be used on 3M SM-20 tools only on the face of the cutter. • For cutting speed recommendations, see pages 542-547
W1
3M AXKT-2006 INSL
High Durability Inserts for APMX
Heavy Milling Applications
RE
BS RE S
Dimensions Tough 1 Hard Recommended
Machining Data
IC330 ap fz
IC328
Designation W1 INSL APMX S RE BS IC830 (mm) (mm/t)
IC928
IC950
IC808
IC908
IC810
IC910
IC4100
3M AXKT 2006PDTR-RM 13.50 22.40 20.00 6.80 1.00 3.34 • •• 1.40-20.00 0.20-0.40
13.50 22.50 20.00 6.80 1.00 3.05 • • • • • • • • • • 1.40-20.00 0.15-0.30
3M AXKT 2006PDTR
• Reduce feed by 50% during engagement and exit from the workpiece; this practice will substantially increase insert life
• For cutting speed recommendations, see pages 542-547
PDTR-RM PDTR
463
