Page 146 - MILLING CATALOG p319-550
P. 146
MILLING INSERTSHM90 ADKW 1505PDR W1
IC928Milling Inserts for Unfavorable
IC908Conditions and Heavy Interrupted12APMX lNSLRd°
IC910Cut on Hardened SteelRE S
Recommended
BS Tough 1 Hard Machining Data
Dimensions
ap fz
Designation W1 INSL APMX S RE BS ••• (mm) (mm/t)
HM90 ADKW 1505PDR 9.59 16.15 12.00 5.83 0.80 2.45 1.20-12.00 0.08-0.15
• Reinforced cutting edge, resistant to edge breakage and chipping • Recommended for milling at unfavorable conditions and heavy interrupted cut • Different corner radii
can be ground • For cutting speed recommendations, see pages 542-547
For tools, see pages: F90AD-SFR (211) • HM90 E90AD-15 (31) • HM90 E90AD-M-15 (32) • HM90 E90AD-M-15-JHP (32) • HM90 F90A-15 (210)
• HM90 F90A-15-JHP (210) • SM (250)
Conventional MILL2000
Dovetail side shape gives better support, Helical cutting edge for a smooth cut
eliminates possible pullout from seat
Ground wiper controls surface finish at high feeds Thick insert for improved strength and rigidity
Positive rake angle for low cutting forces
W1
3M AXKT 1304 APMX INSL
High Durability Inserts
for Heavy Milling
BS RE S
Dimensions Tough 1 Hard Recommended
Machining Data
IC330 ap fz
IC328
Designation W1 INSL APMX S RE BS IC830 (mm) (mm/t)
3M AXKT 1304PDR IC928
3M AXKT 1304PDR-MM IC950
IC808
IC908
IC810
IC910
8.40 14.12 12.00 4.55 0.60 2.10 • • • •••• 1.00-12.00 0.15-0.35
• • • • • 1.00-12.00 0.10-0.22
8.40 14.12 12.00 4.55 0.60 2.10
• For cutting speed recommendations, see pages 542-547
PDR-MM PDR
462 ISCAR