Page 136 - MILLING CATALOG p319-550

MILLING INSERTS W1 Rd°

APKT 1003PDTR/L-RM APMX INSL Recommended
Inserts with Reinforced Helical Machining Data
Cutting Edge for Interrupted
Cut and Heavy Machining

BS RE S

Dimensions Tough 1 Hard

IC28 ap fz
IC328
Designation W1 INSL APMX S RE BS IC928 (mm) (mm/t)
IC250 0.10-0.20
IC950 0.10-0.20
IC910
IC4100

APKT 1003PDTL-RM (1) 6.70 11.00 8.00 3.47 0.50 1.20 • 0.90-8.00
6.70 11.00 8.00 3.47 0.50 1.20 • • • • • • • 0.90-8.00
APKT 1003PDTR-RM

• APKT...L should be used only on left-hand tools. • For cutting speed recommendations, see pages 542-547

(1) PDTL-Left-hand inserts are used only for special tools.

For tools, see pages: APK-FE (239) • ETS (341) • HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27)

• HM90 F90AP-10 (200) • HM90 F90AP-10-JHP (200)

W1 Rd°

APKT 1003PDTR-76 APMX INSL Recommended
Inserts with 2 Helical Cutting Machining Data
Edges with Ribs Along
Edge for Interrupted Cut

BS RE S

Dimensions Tough 1 Hard

IC330 ap fz
IC328
Designation W1 INSL APMX S RE BS IC830 (mm) (mm/t)
IC928
IC950
IC910

APKT 1003PDTR-76 6.70 11.00 8.00 3.47 0.50 1.20 • • • • • • 0.90-8.00 0.08-0.15

• Reinforced helical cutting edge with ribs on rake face to reduce heat transfer. Used for interrupted cuts and heavy machining • For cutting speed recommendations, see

pages 542-547

For tools, see pages: APK-FE (239) • E90AC (36) • HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90

F90AP-10 (200) • HM90 F90AP-10-JHP (200)

W1 Rd°

APKT 1003..TR-RM APMX INSL Recommended
Inserts with Various Corner Machining Data
Radii and a Reinforced
Cutting Edge for Interrupted
Cut and Heavy Machining

BS RE S

Dimensions Tough 1 Hard

IC28 ap fz
IC330
Designation RE INSL W1 APMX S BS IC328 (mm) (mm/t)
IC928
IC950
IC910

APKT 100308PDTR-RM 0.80 11.00 6.70 8.00 3.47 0.90 ••• • 1.20-8.00 0.08-0.15
3.47 0.60 • •
APKT 100310PDR-RM 1.00 10.75 6.70 8.00 -• 1.40-8.00 0.08-0.15
•• • 1.60-8.00 0.08-0.15
APKT 100312TR-RM 1.20 10.50 6.70 8.00 3.47 ••

APKT 100316PDTR-RM 1.60 10.90 6.70 8.00 3.47 0.80 ••• 2.00-8.00 0.08-0.15

APKT 100320PDTR-RM 2.00 10.90 6.70 8.00 3.47 0.80 •• 2.40-8.00 0.08-0.15

APKT 100332TR-RM 3.20 10.70 6.70 8.00 3.47 - • 3.60-8.00 0.08-0.15

APKT 100340TR-RM 4.00 10.55 6.70 8.00 3.47 - 4.40-8.00 0.08-0.15

• For cutting speed recommendations, see pages 542-547

For tools, see pages: APK-FE (239) • HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90 F90AP-10 (200)

• HM90 F90AP-10-JHP (200)

APKT 1003…TR-RM APKT 1003….PDTR

452 ISCAR