Page 137 - MILLING CATALOG p319-550
P. 137
RE W1 IC328 Rd°
APKT 1003..R INSL MILLING INSERTSRecommended Machining Data
Inserts with Ground
Large Corner Radii
S
Dimensions
ap fz
Designation W1 INSL S RE (mm) (mm/t)
2.50 • 2.90-8.00
APKT 100325R 6.70 10.10 3.50 3.00 • 3.40-8.00 0.08-0.15
APKT 100330R
APKT 100340R 6.70 10.10 3.50 4.00 • 4.40-8.00 0.08-0.15
6.75 10.65 3.40 0.08-0.15
• Standard tool pocket radius should be increased to 0.5 mm larger than the insert radius • For cutting speed recommendations, see pages 542-547
For tools, see pages: APK-FE (239) • HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90 F90AP-10 (200)
• HM90 F90AP-10-JHP (200)
W1 Rd°
HM90 APKW 1003PDR 1 Recommended
Inserts with a Reinforced Machining Data
Edge and Flat Rake for APMX lNSL
Hardened Steel and Milling
at Heavy Interrupted Cut 2
IC928BS RES
IC908
Dimensions IC910Tough 1 Hard
ap fz
Designation W1 INSL S RE BS APMX (mm) (mm/t)
HM90 APKW 1003PDR 6.76 0.80 8.00 • • • 1.20-8.00
11.47 3.50 1.40 0.08-0.15
• Reinforced cutting edge, resistant to edge breakage and chipping • Recommended for milling at unfavorable conditions and heavy interrupted cut • Different corner radii
can be ground • For cutting speed recommendations, see pages 542-547
For tools, see pages: APK-FE (239) • HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90 F90AP-10 (200)
• HM90 F90AP-10-JHP (200)
HM90 APKT 1003PD-W W1
Wiper Insert
M90 APMX INSL
RE820 W
W
S
BS RE
Dimensions Recommended
Machining Data
IC908 ap fz
(mm/t)
Designation W1 INSL S RE BS APMX (mm) 0.15-0.30
8.00 • 0.10-1.00
HM90 APKT 1003PD-W 6.69 11.65 3.55 0.80 4.40
• Must be used together with HM90 APKT 1003PDR inserts • For cutting speed recommendations, see pages 542-547
For tools, see pages: HM90 E90A-10 (24) • HM90 E90A-M-10 (28) • HM90 E90A-MM-10 (27) • HM90 E90A-MM-10-JHP (27) • HM90 F90AP-10 (200)
• HM90 F90AP-10-JHP (200)
453